Openwork gloves made of white goat down. How to crochet gloves for beginners: video, diagrams. How to crochet children's, men's and women's gloves: patterns, descriptions Beautiful crocheted gloves patterns and descriptions

Gloves are a beautiful and useful thing. They can not only warm, but also decorate, make the image more sophisticated, calm, or vice versa - bright, catchy. Crocheted gloves offer a particularly wide variety of models for all seasons and occasions, which create worthy competition for models created with knitting needles.

It is due to this method of execution that gloves can turn out to be both dense and textured, and very thin, openwork. Of course, the deciding factor will be the yarn you choose - it is responsible for the warmth, thickness and degree of delicacy of the product. Such a variety of knitting possibilities allows you to get equally beautiful gloves for women and girls, comfortable and practical gloves for children, and warm gloves for men.

Crochet gloves - diagram and description

Let's take a closer look at the most common options for crocheting gloves, including a method of crocheting products for beginner needlewomen. We will also learn how to crochet mitts - fingerless gloves, and we will analyze in detail the methods of knitting men's, women's and children's gloves.

Knitting for beginner needlewomen

Crocheting gloves provides the opportunity to create fairly thin, but dense and warm products. Let's try to create one of these, while performing a simple pattern of the same type.

Popular articles:

Crocheting gloves for beginners starts with definitions hand measurements . You can do this as follows: trace your palm with a pencil or pen on a sheet of paper. Now, in accordance with the diagram, we measure the following indicators:

A- the width of the palm at the base of the fingers (the approximate width of our glove); B- the distance from the base of the palm to the bend of the thumb; C— the distance from the base of the palm to the tip of the middle finger (glove length without cuff); D- the distance from the base of the palm to the base of the little finger.

Materials for work:

jersey;
hook No. 2.5.

Work progress

We collect a chain of chain loops equal in length to the circumference of the wrist + 1 cm to freely put on the glove. We connect the chain into a ring with a connecting post and to start knitting the first row we make 3 lifting air loops.

First row knit st. s/n and finish the row with a connecting loop in the last lifting loop. Next for knitting second row make 2 air lifting loops and knit an elastic pattern, alternating convex and concave relief columns. Finish the row with a connecting loop. Next rows Knit elastic bands the same way as the second one. The cuff of the glove, knitted with an elastic pattern, can be of any width from 4 to 6 cm at your discretion.

Then we move on to knitting main part of the glove. We knit the glove in half columns in circular rows in a spiral, that is, we do not make lifting loops, then the seam of the initial loops of the row will not be visible.

For yourself, mark the sides of the glove where the thumb will be located and where the little finger will be located.

Having connected 2-3 circular rows with half-columns along the side near the side of the thumb, we begin to make additions to expand the wedge of the thumb. To do this, in the next 5-7 rows, add one half-column at a time, knitting two from one loop.

When the height of the knitting reaches the base of the thumb in the last row, without tying 6-7 loops to the edge, we pick up a chain of 8-9 chain loops and fasten it into the arch through 12-14 loops of the previous row. This creates a hole for the thumb, which is knitted last.

Before you start knitting the fingers of the glove, calculate the loops for each finger. You can identify them by trying on the glove and noticing the loops on the inside and outside. To knit the little finger, attach the thread from the palm side, make 3-4 air loops and attach the arch to the back of the glove. Next, knit half columns in a circle to the height of your little finger.

Closer to the tip, make decreases on both sides of the finger to narrow it. When you have knitted your finger to its full height, close the loops by knitting single crochets in a circle - one of the two loops. When the hole narrows, cut the thread and secure it by pulling the tip through the loop. Insert a needle into the remaining tip of the thread and mend the remaining hole, thread the thread on the wrong side.

If you look at your hand, you will see that the fingers are located at different heights - the first little finger, the index finger a little higher, and the middle and ring fingers at the same level. Therefore, after knitting the little finger, return to knitting the main part of the glove. Taking the remaining thread to work, knit one circular row with half-columns along the inside, the arch at the base of the little finger and the outside of the glove. Now you can knit the ring finger. Attach a new thread to the inside, tie a chain of 4 chains. loops and secure the arch on the outside (photo 1).

Knit half stitches to the height of your finger, narrowing it at the top, making decreases along the sides. Finish the knitting in the same way as on the little finger - make decreases by knitting two single crochets together until the opening narrows to a small hole.

Take back the remaining main thread and knit one round row through the arch of the ring finger. Next, attach the thread for knitting the middle finger. If you get a large hole for your finger at the base, then make decreases in the corners, knitting two half-stitches together (photo 2).

Knit the index finger with the thread left from the main part of the glove. Attach the thumb yarn and knit in the round in half stitches, decreasing at the corners first, knitting two half stitches together until the hole is equal to the diameter of the finger. Next, knit it to height and narrow it with single crochets.

The glove for the other hand is knitted in the same way, but in a mirror image. The back part can be decorated with a knitted flower or embroidery.

Model without fingers

Very popular nowadays, fingerless gloves, also called mitts, allow you to drive and use your phone quickly and without discomfort. In addition, the process of knitting this model is much simpler than knitting simple gloves - because here you do not need to work with each finger separately. , since they are knitted for both the summer and winter seasons. Let's take a closer look at how to crochet fingerless gloves, which look very impressive in the autumn and winter.

Materials for work:

yarn “ADELIA Jessica” (67% wool, 33% polyester, 260 m/100 g);
hook number 3.

Work progress

First, you need to make a chain of air loops of such length that, folded in half, four fingers can easily fit into it. We will knit the mitt from top to bottom - from fingers to wrist. Let's close the chain into a ring using a connecting stitch, knit two chain stitches and then three rows of single crochets (photo 1).

Next we move on to knitting with lush columns. A lush stitch is three or more “under-knitted” double crochets, knitted in one loop at the end. In this case, the lush columns consist precisely of three “incomplete” double crochets. To make a fluffy stitch, we make a yarn over, insert the hook into the loop of the previous row and pull out the thread. We knit the thread into the resulting loop and yarn over (photo 2).

There are two loops on the hook. Let’s yarn over again and again “loosely knit” a simple double crochet (photo 1). There are three loops on the hook (photo 2). Let's repeat everything again - there are four loops on the hook (photo 3). Finally, we knit all four loops at the same time (photo 4). The lush column is ready!

We knit three rows of puffy stitches, then three rows of single crochets, then two more rows of puffy stitches. In principle, the alternation of different knittings can be anything - it all depends on the taste and desire of the knitter.

We have come to the base of the thumb. We knit a chain of fifteen air loops and attach it with a connecting post to the main knitting four loops from the beginning of the chain. Let's try on the mitt - the thumb should fit freely into the hole intended for it. If the hole is smaller or larger than you need, change the length of the chain (photo 1).

Let's continue knitting in the circle with single crochets - only the row has become longer by fifteen (in this case) loops. Here it is more convenient to knit in a spiral, without lifting loops (photo 2).

Having knitted two rows with single crochets, we begin to make decreases. It is best to do them this way: evenly decrease four loops in a row - knit the next row without decreasing - decrease four loops again - knit the row again without decreasing. There are four rows with decreases in total. Having finished decreasing, we will knit another four to five rows without decreasing. Let's complete the knitting with five rows of embossed stitches.

The details remain: the upper part, like the hole for the thumb, can be decorated next to a picot, having previously knitted two or three rows of single crochets. We knit the second mitt in the same way as the first. A pair of fingerless gloves is ready!

Master class - how to knit men's gloves

As a good gift for a loved one, you can crochet men's gloves. This will not take much time and effort, especially if you work according to the master class on crocheting gloves. In this case, we will talk about beautiful gloves that will look great in a monochromatic, moderate color scheme, preferably black, gray, dark blue.

To begin with, you should also trace the outline of a man’s hand on paper, or measure his old gloves.

Materials for work:

thin acrylic or wool blend yarn;
hook No. 2-2.5.

The gloves are knitted in the transverse direction from the little finger to the thumb. One glove consists of two parts: the back with four knitted fingers and the inner with a knitted fifth thumb. We sew the finished halves of the glove together; finally, tie the cuff along the bottom with an elastic band made from embossed columns.

Work progress

Cast on the initial chain of chain stitches from the beginning of the cuff to the tip of the little finger according to the pattern. Next, knit rows in single crochet stitches the width of your little finger. Start each new row of columns with one lifting air loop.

When knitting single stitches towards the fingers, knit to the base of the ring finger and cast on a chain of chain stitches up to the tip of the ring finger.

The inner half of the glove is knitted exactly the same as the back half up to the middle finger. At the beginning of knitting the index finger, in a row of stitches in the direction from the cuff to the fingers, tying the stitches to the base of the thumb, cast on a chain of chain stitches equal to twice the length of the thumb. Close the chain into a long loop, continuing to knit stitches in a row to the base of the index finger, then cast on a chain of chain loops to the length of the index finger.

Work several rows of single crochets, first along the index finger chain, along the wrist row to the thumb loop, then along the thumb chain and then to the cuff. Having turned the work, knit the stitches in the opposite direction until you have knitted strips the width of your index finger and thumb.

Place the two halves of the glove, the back and the inside, together. You can connect them by crocheting a row of connecting posts along the contour or simply sewing them with a needle; also sew the sides of the thumb. Turn the sewn glove over to the other side so that the seam is on the inside.

Along the bottom of the glove, first knit a row of double crochets, then two rows of embossed stitches, alternating convex and concave. Knit the second glove in exactly the same way, only when sewing, place the pieces so that the thumb is on the other side.

How to knit openwork gloves for a woman

Adding gloves to your wardrobe is always a great idea, because they warm your hands and complete a woman’s look in the cold season. Even needlewomen without much experience can do this with their own hands; you just need to select a detailed knitting pattern with a description. Let's look at how to create openwork crocheted gloves with step-by-step photographs.

We take measurements

Using the hand measurement method indicated at the beginning of the article, we determine the size of future gloves. Now you need to calculate the required number of loops. Usually, in descriptions of knitting gloves they mention how many loops are contained in a 10*10 cm sample. However, you can do it simpler: knit a small sample (10-15 loops, 4-5 rows) and find out how many elements are in whole centimeters.

In this case, there are 3 double crochets in 1 cm, that is, initially 3 air loops. The width of the glove is 8 cm, which means 8*3 = 24 (add 1 more loop to make the pattern symmetrical = 25).

Glove knitting pattern

Rice. 1: Knitting pattern for the upper part of the right glove; Rice. 2: Knitting pattern for the bottom of the right glove.

Rice. 1: Knitting pattern for the thumb of the glove; Rice. 2: Knitting pattern for glove cuff.

Work progress

We begin to knit the upper part of the glove of the right hand. We cast on a chain of 25 chain stitches + 3 chain stitches to move to the next row. We knit 2 rows with double crochets in each loop (photo 1).

In the third row we knit 6 double crochets, then we start knitting the pattern: we skip one loop, in the next we knit a “fan” of 6 double crochets, we skip one, two double crochets. We repeat the pattern element 2 more times and finish the row with double crochets (photo 2).

We knit another 8 rows with the pattern, or as many as needed for your hand size - try it on to know for sure. In the next row above the outer “fans” we knit only 3 double crochets, through one loop (photo 1).

We knit another row with a pattern element in the middle. Then 2 rows with single crochets. At this stage, the length of the part should be equal to the distance from the base of the palm to the base of the little finger ( d).

Now you need to distribute the number of loops on each finger: 25 / 4 = 6 and one loop in stock (6 - on the index finger; 7 - on the middle finger; 6 - on the ring finger; 6 - on the little finger).

We knit 19 double crochets, since the little finger is located slightly lower than the other fingers - we leave 6 loops for it.

Move to the next row and begin knitting the ring finger. In this case, there are only 10 rows of 6 double crochets. Finish with a “fan” of 6 double crochets in a loop in the middle of the row, fasten and cut the thread. At this stage, it is important to try the part on your hand to find out the desired finger length.

We knit the middle finger in the same way. In this case, there are only 12 rows of 7 double crochets. Finish with a “fan” of 6 double crochets in a loop in the middle of the row, fasten and cut the thread.

We knit the index finger in the same way as the ring finger.

We knit the little finger. In this case - 7 rows of 6 double crochets. Finish with a “fan” of 6 double crochets in a loop in the middle of the row, fasten and cut the thread. The upper part of the right glove is almost ready.

We tie the part in a circle with single crochets (2 single crochets for each outermost stitch, the tops of the fingers - 1 stitch in each loop and 1 stitch in the spaces between the fingers for a beautiful turn).

Now is the time to move on to knitting the lower part of the right glove, in accordance with the patterns indicated above.

We cast on a chain of 25 chain stitches + 3 chain stitches to move to the next row. We knit the lower part of the glove with double crochets. We knit so many rows so that the length of the part is equal to the distance from the base of the palm to the bend of the thumb ( V). In this case - 10 rows (photo 1).

In the next row we leave room for the thumb. We knit 2 double crochets, skip 8 stitches (or as many as you need, try them on), above them we knit a chain of the same number of chain stitches and continue knitting with double crochets. In the next row, we knit 1 double crochet into each loop of the chain.

We knit to the base of the little finger. In this case - 3 more rows. We knit the little finger. Then we knit a row of 19 double crochets (photo 2). Then we knit the remaining fingers in the sequence: index, middle, ring.

How to knit children's gloves

Another interesting model of knitted gloves is thin openwork. They are suitable for girls. same for girls. Beautiful, light, delicate - they are perfect for a beautiful outfit for a matinee, graduation or any other celebration. A detailed master class will help you learn how to crochet children's gloves.

Materials for work:

cotton threads No. 30-40;
hook number 1.

Work progress

We start knitting gloves from the fingers. To do this, we knit 8 single stitches into the initial ring, tighten the ring, make a connecting loop in the first stitch and begin knitting with arches of 3 air stitches. loops in a circle around the cylinders, tying the index and middle fingers, try on the knitted cylinders and add arches to the base of the finger.

Connect the finished cylinders for the index and middle fingers and tie them around with 1-2 rows of the main pattern.

The next cylinder on the ring finger, also attach to the side of the middle finger and tie around now 3 cylinders.

Then it’s the turn of the little finger, attaching the cylinder of the little finger, tie the main pattern around the palm, do not forget to try on the glove while tying and, if necessary, decrease the arches between the fingers on the inside of the palm.

Having tied the glove to the thumb, attach the knitted cylinder and continue tying, making one arch decrease in each row on the inside of the palm from the point of attachment.

Having knitted to the end of the palm, stop decreasing and knit in the round until the required length of the glove, then tie the edge with a beautiful border according to this pattern:

Video lesson

A video master class will help beginning needlewomen quickly get used to the technique of crocheting gloves. This will save time and protect you from possible mistakes made by beginners. The video shows an option for knitting mittens - another interesting way to combine gloves, mittens and mittens.

Video tutorial - how to crochet gloves

Do you want crochet gloves? Then our master class will help you learn the technique of knitting gloves and you will understand how to tie warm, but thin and dense gloves.

For knitting, select thin wool yarn and a hook No. 2.5.

Cast on a chain of chain stitches equal to the circumference of your wrist + 1 cm to freely put on the glove. Connect the chain into a ring with a connecting stitch and to start knitting the first row, make 3 air stitches. lifting loops. Knit the first row st. s/n and finish the row of connections. loop into the last loop of the lift. Next, to knit the second row, make 2 air. lifting loops and knit an elastic pattern, alternating convex and concave relief columns. Finish the row with the same connection. loop. Knit the next rows of elastic in the same way as the second. The glove cuff knitted with an elastic pattern can be of any width from 4 to 6 cm at your discretion.

Then proceed to knitting the main part of the glove. Knit the glove in half columns in circular rows in a spiral, i.e. do not make lifting loops, then the seam of the initial loops of the row will not be visible. For yourself, mark the sides of the glove where the thumb will be located and where the little finger will be located. Having knitted 2-3 circular rows with half-columns along the side near the side of the thumb, begin to make additions to expand the wedge of the thumb. To do this, in the next 5-7 rows, add one half-column at a time, knitting two from one loop.

When you knit in height to the base of the thumb in the last row, without knitting 6-7 loops to the edge, cast on a chain of 8-9 air loops and fasten it into the arch through 12-14 loops of the previous row. This creates a hole for the thumb, which is knitted last.

Before you start knitting the fingers of the glove, calculate the loops for each finger. You can identify them by trying on the glove and noticing the loops on the inside and outside. To knit the little finger, attach the thread from the side of the palm, make 3-4 air. loops and attach the arch to the back of the glove. Next, knit half columns in a circle to the height of your little finger.

You can buy them, or you can knit them yourself. We will connect crochet gloves. They are not too difficult to knit. For gloves, it is better to choose soft yarn. Hard and rough will not work here at all. Hands wearing such gloves will be uncomfortable. In addition, it will be good if the yarn contains wool. Then the gloves will be even warmer. Detailed description from

To knit gloves we will need:

Yarn of two colors;
Hook.

You can use any colors for knitting gloves. You can choose two colors of yarn that match each other, or you can, on the contrary, take yarn in contrasting shades. In this case it is dark blue and orange.

Let's start knitting gloves from the fingers. We knit six single crochets in a sliding loop. And then we make increments. In the first row we increase in all loops, in the second in all second stitches. And so on. That is, we knit a small circle. The number of rows with increases will be different for everyone, since the thickness of the fingers is different for everyone. We knit a circle whose diameter will be equal to the circumference of the thumb.
And we knit further in a circle until the finger reaches the desired size. To do this, we try it on while knitting.
Photo 1, 2

And then we knit a circle again, the diameter of which this time should be equal to the circumference of the index finger. And we also knit a finger in a circle. And we do this with the three remaining fingers.
Photo 3

All our fingers are tied. Now we start knitting from the little finger. And attach each finger with a single crochet. We don't touch the thumb yet.
Photo 4

In two rows we will make decreases at the joints of the fingers.
And then we simply knit in the circle with single crochets. Trying the glove on your hand. We tie it to the thumb.
Photo 5

Using a single crochet stitch, we attach the thumb to the glove.
Photo 6

Now we will also make decreases in the first three rows at the junction of the thumb.
And then in the next two rows we will make one decrease over each finger.
And we knit in the round up to the wrist without decreasing. And then in one row we will make decreases in every fifth stitch.
Photo 7

And then we will knit five rows with half double crochets.
Photo 8

And we'll make an orange trim on top. We knit three double crochets in a loop with one tip. We skip the loop and knit the same stitches into the next loop.
Photo 9

And decorate the gloves with a lace made of air loops. And we will attach tassels of orange yarn to them.
Here they are crochet gloves they work!

Openwork gloves knitted or crocheted look very beautiful and feminine. This is an impeccable accessory and just a warm thing. Different openwork creates original patterns. It is difficult to imagine a modern woman without such charming products. Learn how to make openwork gloves with knitting needles and crochet later in the article, as well as the threads that are most often used for these products.

Quite often used middle strand yarn for gloves. It could be baby pekhorka, which is very soft and pleasant to the body.

A thread of ordinary pekhorka is also often used. If the master wants to get something fluffy, then takes into account mohair.

Summer models, or models for spring days can be made using regular cotton threads. Something thicker than iris would look good on these gloves. You can make warmer products and even winter models, but for this it will be more profitable to use openwork inserts only on the elastic bands of such gloves, and make the base with denser patterns.

How to crochet openwork gloves?

Crocheting gloves is not so difficult, the main thing is to correctly calculate the number of loops. A master class on crocheting openwork gloves will tell you in detail how to do this.

Beautiful patterns and pekhorka thread will help you complete demi-season patterns quickly and easily.

Openwork gloves with openwork rhombuses crochet

A beautiful and simple model of openwork crochet gloves is made according to two patterns. For example, a grid of posts, it makes the model very elastic. Along the central part There are diamonds on the back side. Additionally, such models have a beautiful border. They are decorated in a very original way with beads along the central part of the diamonds.

For work use:

white pekhorka thread;
pekhorka hook;
beads.

Measurements

Measure wrist circumference, palm length, finger length and palm circumference.

Sample

Knit a small fabric using a grid of posts and count the knitting density for it. To do this, place a ruler and count how many elements you get in a 10 cm row along the ruler, and how many rows you get in a 10 cm ruler.

Crochet mesh

Fingers

Work begins from the fingertips. Several chain stitches are cast on, then single crochets are knitted into a ring to make the central part denser. Next you need to go to the main mesh pattern with small additions.

Important! Make additions after the first row of the grid, immediately according to the desired width of each finger.

Knit each finger in this pattern. Then connect 4 fingers in a large circle, and knit the distance from the line of 4 fingers to the line of the beginning of the thumb. At the same time, turn on the openwork pattern with diamonds on the back of the glove.

Rubber

After knitting the base of such an openwork model, you will have to make good decreases to make an elastic band so that the item fits more tightly to the wrist. Knit 6 rows of elastic according to the grid pattern. Then all that remains is to make the border and decorate the product.

Border

For the border, use only two rows. This is a row of double crochets and a shell.

Decoration

For decoration, use only beads, sew them into the central parts of the diamonds, and the work is ready.

A very cute and interesting model without seams, does not even require assembly. Even a beginner can handle it easily.

Knitting openwork gloves with knitting needles

You can use knitting needles to create no less charming openwork patterns, but the main difference between these gloves is that the fabric will be smoother and smoother. When making such products, it is more convenient to place the openwork along the elastic band and the central part of the gloves.

For the demi-season version, some craftsmen make models entirely from openwork fabric and even the openwork can be seen on the fingers. Next, lovely knitted gloves with openwork fabric on the central part of the back side of the model and with openwork on the elastic band. Work the fingers and the rest of the fabric using simple knit stitches or the usual stockinette stitch.

Pink knitted gloves with openwork leaves

A beautiful feminine model of gloves with openwork knitted fabric is made from elastic. Amateurs and beginners can cope with such fashionable new items. Therefore, we purchase the color of pekhorka we like and carry out beautiful models according to the instructions.

For work use:

pekhorka yarn;
knitting needles according to the thickness of the thread.

Measurements

Measure the circumference of your wrist. Then measure the length of your fingers and the length of your palm. The elastic band can be reduced by 2 cm so that the models fit the elastic band more tightly.

Sample

Knit a square fabric using an openwork pattern, and measure the density of the knitting. The knitting density for this pattern is measured very simply. To do this, you just have to place a ruler along the row and count how many loops are installed in 10 cm. Next, turn the ruler and count by analogy the number of rows per 10 cm.

Rubber

These charming women's accessories are made from the elastic to the fingers. To do this, you will first need to knit 1*1 5 rows with an elastic band. Then move on to the main pattern of the fabric with openwork leaves and stockinette stitch. Knit the required length of elastic according to the 1*1 pattern provided, and then make small additions around the circumference.

Warp

Thumb

Select the stitches for the thumb and leave the stitches on additional needles for now. Next you will need to knit the thumb with simple knit stitches.

Palm

After selecting the thumb, you will need to knit the palm and back surfaces to the line of the thumbs. After this, you will need to divide the loops into equal 4 parts, and cast on two loops for each to close the holes between the fingers.

Fingers

Next, you need to knit each finger separately. It is more convenient to perform fingers with three knitting needles. Knit each one to the required length. To close the loops, use shortening the loops on both sides to create a straight line of side seams.

Assembly

To assemble this model, you only need to tuck a small elastic band, which is made according to the 1*1 pattern with knitting needles. Fold and sew inside.

These charming products can be made using knitting needles using beautiful openwork patterns.

Making fashion accessories is very simple. The result is warm, beautiful products. It will be possible to complement fashionable looks with such gloves.

The models are good for girls and older women.

Depending on the thickness and composition of the thread, you can make both the summer and winter versions using the same pattern. To all masters, creative inspiration and more time for your favorite things.

Each of us has special moments in our lives when we want to look appropriately elegant and special. Crocheted openwork gloves to match your outfit, they will be the necessary accessory that will complete your look. To knit gossamer-thin gloves, you will need cotton threads No. 30-40 and a hook No. 1.

Connect the finished cylinders for the index and middle fingers and tie them around with 1-2 rows of the main pattern.

The next cylinder on the ring finger, also attach to the side of the middle finger and tie around now 3 cylinders.

Having tied the glove to the thumb, attach the knitted cylinder and continue tying, making one arch decrease in each row on the inside of the palm from the point of attachment.