Original knitted pullover will help you replenish your wardrobe with an exclusive item. Knitting patterns with detailed description will help you make your dream come true, and you can choose the color of the yarn to your taste.

Dimensions
38/40

You will need
Yarn (40% merino wool, 30% viscose, 20% polyamide, 10% cashmere; 90 m/50 g) - 400 g beige and 200 g gray; knitting needles No. 5; circular knitting needles No. 5.

Patterns and schemes

Garter stitch

Rhombus A
Cast on 63 stitches and knit 1 purl row; this row is not taken into account in subsequent indications of the number of rows.

Continue work according to diagram 1. It shows the 1st half of a rhombus with a middle loop. Add the 2nd half in a mirror image; to do this, read the loops of the pattern without the middle loop from left to right, while instead of knitting loops together with a tilt to the left, knit 2 loops together with the front one and for the “braid” constantly cross 6 loops to the left.

The diagram shows the facial rows. In the purl rows, knit all the loops according to the pattern or acc. instructions.

After 60 rows from the initial row, knit the remaining 3 loops as 1 loop with a double slant to the left, cut the thread and pull through the last loop.

Diamond B
Knit like diamond A, but after 52 rows from the beginning row, bind off the remaining 11 sts as purl stitches.

Braid pattern
The number of loops is a multiple of 8 + 2 edge loops = knit according to. diagram 2. It shows the facial rows. In the purl rows, knit all the loops according to the pattern.

Constantly repeat rapport between edges. Repeat rows 1–8 constantly.

Rubber
Rows in forward and reverse directions (the number of loops is a multiple of 4 + 2 edge loops). Edge, * 1 purl, 2 knit, 1 purl, from * constantly repeat, edge.

Circular rows (number of loops is a multiple of 4): alternately knit 2, purl 2.

Flat seams
External hinges garter stitch diamonds after the front and back rows form a visible “knot”. For the seam, join the knots of the aligned edges using a butt overcast stitch.

If the “knotted” edge coincides with the starting row, butt-join 1 knot with 1 loop of the starting row, respectively.

If the initial rows coincide in the middle of the front, connect the loops of the initial rows with a butt stitch.

Knitting density
Diamond A – width 33 cm, height 27.5 cm;
rhombus B – width 33 cm, height 25.5 cm;
21 p. x 22.5 r. = 10 x 10 cm, knitted with a braid pattern (measure slightly stretched);
19 p. x 23 r./circle. R. = 10 x 10 cm, tied with an elastic band (measure slightly stretched).

Attention!
The dimensions of the diamonds were obtained by measuring the model.

Sleeves are knitted from top to bottom. Arrow on pattern = knitting direction.

Pattern

Completing of the work

Back
Work 2 diamonds A and 1 diamond B with gray thread; arrows on pattern = knitting direction. Sew the details according to pattern, making flat seams.

Before
Knit like a back.

Sleeves
Using beige thread, cast on 74 loops and knit in a “braid” pattern, while knitting the edges only in garter stitch.

After 39 cm = in the 88th row from the starting row (= purl row), knit the 2nd + 3rd loop on each “braid” and the 4th + 5th loop together with the purl = 38 stitches.

Continue working with the rubber band.

After 25 cm = 58 rows from the beginning of knitting the bar, close all the loops according to the pattern.

Assembly
The “braided” edges of the sleeves and the beveled side edges of the back and front are joined at 39 cm with flat seams.

Due to the different number of rows, there are more knots on the edges of the sleeves than on the edges of the diamonds. Therefore, when making seams, skip approximately every 4th knot on the edge of the sleeves.

The seams of the sleeve strips are also done as flat seams.

Using beige thread, cast on 152 stitches on circular needles along the edge of the neckline and for a turn-down collar, knit 30 cm with an elastic band in circular rows. Then loosely close the loops according to the pattern.

2.

Dimensions

Plus S/M (M/L) L/XL

You will need
Yarn (100% wool; 50 g/104 m) - 21 (23) 25 skeins light beige; knitting needles No. 4 and 4.5; circular knitting needles No. 4, 40 cm long.

Patterns and schemes

Pattern "Braids"

Knitting density
22 p. x 32 r. = 10 x 10 cm, connected connected stockinette stitch knitting needles No. 4.5.

Attention!
The knitting density must be as specified! Therefore, before starting work, you should knit a sample pattern: cast on 36 stitches and knit 14 cm in stockinette stitch.

Then count the loops on the middle section of the manufactured sample, 10 cm long: if there are more than 22 loops on this section, change the knitting needles to thicker ones, if there are fewer, to thinner ones. The main thing is that the density of your knitting matches the specified density across the width.

Knit the product on the same knitting needles as the sample. If the instructions indicate only one number, then it applies to all sizes.

Completing of the work

Back
On knitting needles No. 4.5, cast on 78 sts and knit in a pattern according to the pattern (1st row = purl row), while at the end of each row, cast on 2 (3) 4 times 6 sts on both sides. The first 6 sts cast on . Include in the pattern on both sides, knit in stockinette stitch on the remaining cast-on stitches.

After the last 6 stitches cast on, continue to cast on 4 stitches on both sides at the end of each row - a total of 14 times = 214 (226) 240 stitches.

After 3 r. after the last row with cast-on loops in the next person. row, start decreasing the loops: knit 1, knit 2 stitches together, knit to the last 3 stitches on the knitting needle, remove 1 stitch, knit the next loop and pull the removed loop through the knitted one, knit 1. Repeat these decreases every 4th r. (= in every 2nd row) - complete 11 rows with decreases.

Knit 3 p. after the last row with decreases and mark the beginning of the armholes.

Continue knitting with raglan decreases, but now in every 2nd r. (= in each person row).

Important!
In the pattern, make decreases according to the pattern. When 64 (68) 72 stitches remain, bind off the loops.

Before
Knit like a back, but at the same time knit the neckline: when there are 82 (86) 90 sts on the knitting needles, continue making raglan decreases, close off the middle 30 (34) 38 sts and finish both sides separately.

To round the neck, close from the inner edge at the beginning of each row.
4 times 4 stitches each (continuing to perform raglan decreases!), then bind off the remaining loops in one row.

Right sleeve
On needles No. 4, cast on 86 (94) 102 sts and knit with an elastic band (= alternately purl 2, knit 2, 1st row = purl row). When 16 cm of elastic is knitted, continue working in stockinette stitch using knitting needles No. 4.5.

Important!
On the 1st decrease the stitches evenly so that there are 76 (84) 92 stitches on the needles.

After 4 r. after the elastic band, add 1 stitch on both sides (after/before the edge loops) in every 4th row. – only 10 times = 96 (104) 112 p.

Knit 3 p. after the last increases, mark the beginning of the armholes and begin raglan decreases: knit 1, knit 2 sts together, knit to the last 3 sts on the knitting needle, slip 1 st, knit the next loop and pull the removed loop through the knitted one, knit 1.

Perform raglan decreases every 4th row. (= in every 2nd row).

When 34 p. remain and 1 p. is knitted. after the last row with raglan decreases, close for a bevel at the beginning of each face. row (continuing raglan decreases at the end of the row!) 4 times 6 sts, bind off the remaining loops in one row.

Left sleeve
Knit like the right one, but the top bevel is a mirror image.

Assembly
Sew the parts on the front side with mattress and knitted seams = mattress - longitudinal edges of the parts (= 1 r. x 1 r.), with a knitted seam - edges with closed loops.

Sew raglan seams, starting from the armhole marks.

Execute side seams and sleeve seams.

Bottom bar
Using circular knitting needles No. 4, cast on stitches along the bottom edge of the product from the front side of the loop: start from the right side seam and cast on 1 stitch from each cast-on loop + 1 additional loop for every 2nd loop (the number of loops should be a multiple of 4 stitches. ).

Knit in the round with an elastic band (= alternately knit 2, purl 2) for approximately 9 cm, then bind off the stitches.

Neck trim
Using circular needles No. 4, cast on stitches along the edge of the neckline on the front side of the work: start from the right raglan seam on the back and cast on 1 st from each closed loop along the entire edge of the neckline.

Knit 1 row in a circle. knit stitches, evenly decreasing the stitches so that there are 132 (140) 148 sts on the knitting needles. Then knit: 1 p. purl, 1 p. knit and then continue working with an elastic band (= alternately knit 2, purl 2).

When the width of the binding is 4 cm, close the loops.

3.

Dimensions
36/38 (40/42) 44/46 (48/50)

You will need
Yarn (100% camel hair; OK. 100 m / 50 g) - approx. 650 (700) 750 (800) g red; knitting needles No. 3 and 4; circular knitting needles No. 3; 200 (200) 220 (220) cm red satin ribbon 3 mm wide.

Patterns and schemes

Facial surface

Purl stitch
Front rows - purl loops, purl rows - facial loops.
In circular rows, purl all stitches.

Elastic band A
Alternately knit 2, purl 2.

Elastic band B
Alternately knit 3, purl 3.

Structural pattern
Knit on an even number of stitches:
1st row: chrome, * 1 front, 1 p. remove, as with purl knitting (thread before work), from * repeat, chrome.
2nd + 4th rows: between edges. knit purl stitches.
3rd row: chrome, * 1 p. remove, as in purl knitting (thread before work), 1 knit, from * repeat, chrome.

Repeat in height from rows 1 to 4.

Pattern "Leaves"
In the width of 28 stitches of the pattern, knit 1 x. In the height of the 1st–4th row, perform 1 x

Important!
The “Leaf” pattern is made on the back.

Sequence of patterns
10 (12) 14 (16) r. structural pattern,
12 rub. pattern “Leaves”, 8 (10) 12 (14) r. structural pattern,
12 rub. pattern “Leaves”, *8 (8-10-10) r. structural pattern,
12 rub. pattern “Leaves”, from * repeat 4 more x, finish 18 (22) 24 (28) r. structural pattern = 160 (168) 184 (192) rows.

Cross ribbed pattern
8 rub. purl smooth,
3 r. facial surface,
8 rub. purl satin stitch (start from the purl row and finish with the front row),
3 r. stockinette stitch (start and end with 1 purl row),
8 rub. purl stitch, 2 r. front satin stitch = 32 rub.

Decorative reductions
On the right edge: edge, 2 stitches in stockinette stitch, knit 2 stitches together with a slant to the left (= 1 stitch removed, as with facial knitting, knit the next loop and pull the removed loop through the knitted one);
on the left edge: knit 2 stitches together with a tilt to the left, 2 stitches in stockinette stitch, com.

Double loop
After turning at the beginning of the row, lay the thread before work, insert the knitting needle on the right into the 1st stitch, remove the loop along with the thread. Then pull the thread back strongly = double loop. In the next row, knit both parts of the double loop as one according to the pattern - knit or purl.

Knitting density
24 p. x 37 r. = 10 x 10 cm, knitted with a structural pattern or a “Leaf” pattern;
24 p. x 30 r. = 10 x 10 cm, knitted with a transverse ribbed pattern.
Both samples are knitted using size 4 needles.

Pattern

Completing of the work

Before
On knitting needles No. 3, cast on 118 (126) 138 (146) stitches and knit for the bottom bar 6 cm = 20 r. rubber band A, in 1st person. row after chrome. start with 1 purl. loops.

For side bevels, add a pattern on both sides in every 14th r. from the bottom bar 6 times (in every 14th r. 3 times and in every 12th r. 3 times) in every 14th r. 3 times and every 12th r. 3 times (in every 12th row 5 times and in the next 10th row 1 time) 1 p. = 130 (138) 150 (158) p.

For raglan bevels after 25.5 (23) 23 (21) cm = 94 (86) 86 (78) r. from the bottom bar, decrease 1 x 1 p. on both sides, then in every 4th r. another 16 (20) 24 (28) x 1 p. (see decorative decreases above) = 96 (96) 100 (100) p.

After 18 (22) 26.5 (30.5) cm = 66 (82) 98 (114) r. From the beginning of the raglan bevels, leave the remaining neck loops temporarily.

Back
Knit as before, but after the bottom bar on the middle 28 sts. Perform patterns in the above sequence.

Sleeves
On knitting needles No. 3, cast on 42 (46) 50 (54) loops and knit for a 6 cm bar = 20 r. rubber band A, in 1st person. row after chrome. start with 1 purl. loops, and in the last purl. row, evenly distributed, add 4 (6) 8 (10) sts = 46 (52) 58 (64) sts.

Continue working with the structural pattern using knitting needles No. 4.

For bevels, add on both sides after the 6th row. elastic bands 1 x 1 p., then in every 6th r. another 12 (8) 4 (0) x 1 p., include added loops in the pattern.

At the same time, after 16.5 (15.5) 14.5 (13.5) cm = 62 (58) 54 (50) sts from the elastic, knit with a transverse ribbed pattern = 76 (84) 92 (100) sts.

After 10.5 cm = 32 r. from the beginning of the transverse ribbed pattern, continue working again with a structural pattern.

At the same time, make raglan bevels, as on the front, and start with the 1st decrease in the 1st row = 42 sts.

After 18 (22) 26.5 (30.5) cm = 66 (82) 98 (114) r. From the beginning of the raglan bevels, leave the loops temporarily.

Assembly
Sew raglan seams, side seams and sleeve seams.

On the right sleeve, mark the middle 12 sts. Transfer the remaining loops of all parts to circular knitting needles, starting with 12 marked loops of the right sleeve = 276 (276) 284 (284) sts. On all loops, knit in circular rows with an elastic band In the collar bar, continuing the marks along both sides of the middle 12 stitches.

After 9 r. from the beginning of the collar, continue working in short rows (turn the work after the 9th row): double loop, purl 1. knit a row of up to 12 marked loops and leave these 12 stitches temporarily; to do this, turn and perform a double loop in front of the marked loops.

After this, another 16 x at the end of each next row of 15 sts. Leave the same = 24 sts.

After the last purl. turn the row, make a new mark for the beginning of the circular row and from the mark again knit on all loops in circular rows.

Complete 5 rounds. r., while in the 1st circle. R. Knit double loops according to the pattern together with the next or previous loop.

After this, close the loops according to the drawing.

Pass the satin braid through the holes of the 1st row of the collar-strap = start and end at a distance of 10 cm from the middle of the front (“stitches” should be laid along front side on top of the front tracks).

Using the tape you can adjust the depth of the cutout.

4.

Dimensions

36/38 (40/42) 44/46

You will need
Yarn (40% angora wool, 37% sheep wool, 14% alpaca wool, 9% nylon; approx. 62 m/25 g) - approx. 450 (500) 550 g cognac color; knitting needles No. 5; circular knitting needles No. 5.

Patterns and schemes

Facial surface
Front rows - front loops, purl rows - purl loops.
In circular rows, knit all stitches.

Garter stitch
Front and back rows - front loops.
At circular knitting knit alternately 1 row with knit stitches, 1 row with purl stitches.

Elastic band A
Alternately purl 2, knit 1.

Relief pattern
Knit according to the given pattern. Distribute the loops according to the instructions.

In height, perform 1 x from the 1st to the 24th row, then repeat from the 3rd to the 24th row.

Decreases and increases
For the “upturned” bottom edge: chrome, knit 1, knit 2 stitches together, 31 (34) 37 stitches of patterns in the given sequence, add 1 stitch (= knit 1 crossed loop from the broach), 33 (35) 37 stitches of patterns in the given sequence, add 1 stitch, 31 (34) 37 stitches of patterns in the specified sequence, knit 2 stitches together, knit 1, chrome.

Knitting density
19 p. x 27 r. = 10 x 10 cm, knitted with a relief pattern;
10 p. x 23.5 rub. = 10 x 10 cm, knitted with stockinette stitch.

Pattern

Completing of the work

Back
Cast on 102 (110) 118 loops on the knitting needles crossed with double thread and knit for the bottom bar 4.5 cm = 10 r. with an elastic band, while in the last row add 1 p. = 103 (111) 119 p.

Continue the work with a relief pattern, distributing the loops as follows: chrome, 7 (9) 11 p. garter stitch, 21 p. relief pattern, 12 (14) 16 p. garter stitch, 21 p. relief pattern, 12 (14) 16 p. garter stitch, 21 p. relief pattern, 7 (9) 11 p. garter stitch, chrome.

After 62 cm = 168 r. From the elastic band, close all the loops in one row.

Before
Start like the back, but after 33 cm = 90 RUR. From the elastic band for the raised bottom edge, decrease and increase loops once, as described above. Repeat the technique 6 more times every 4th r.

After 41 cm = 112 r. From the elastic band, begin to form a neckline, for this purpose the average 31 (35) 37 stitches for the neckline are temporarily left and first finish the right side.

To round, close along the inner edge in every 2nd r. 1 x 2 p. and 9 x 1 p. = 25 (27) 30 p.

After 21 cm = 56 r. From the beginning of the neck, close the remaining shoulder loops.

Finish the second side symmetrically.

Sleeves
Cast on 44 loops on the knitting needles crossed with a double thread and knit 9 cm = 20 rubles. with an elastic band.

Continue working with stockinette stitch, and in the 1st row, evenly distributing, add 6 (8) 10 sts = 50 (52) 54 sts.

After 6 r. from the elastic band, add 1 stitch for bevels on both sides, then in every 6th row. another 10 (11) 12 x 1 p. = 72 (76) 80 p.

After 34.5 (33) 31.5 cm = 82 (78) 74 r. From the elastic band, close all the loops in one row.

Assembly
Sew shoulder seams.

For the placket collar, transfer the remaining 31 (35) 37 stitches from the front onto circular knitting needles and, in the curved areas, add another 25 stitches to them; Along the edge of the back neck, cast on 54 (56) 60 sts = 135 (141) 147 sts and knit 9 circles. R. with an elastic band.

In the 10th circle. R. In each purl track, knit 2 stitches together purlwise and close the loops with a needle.

Sew in the sleeves. Sew sleeve seams and side seams.

5.

Dimensions
34/38 (40/44)

You will need
Yarn (100% merino wool; 80 m/50 g) - 350 (400) g gray, (250) g ​​olive, 200 (250) g ​​color. fuchsia and 100 (150) g ​​pistachio; knitting needles No. 5 and 6; short circular needles No. 5.

Patterns and schemes

Rubber
The number of loops is a multiple of 4 + 2 + 2 edge loops.

Edge, alternately 2 purl, 2 knit, 2 purl, edge.
In the front rows, knit the loops according to the pattern.

Facial surface
Front rows - front loops, purl rows - purl loops.

Garter stitch
Front and back rows - front loops.

Purl garter stitch
Front and back rows - purl loops.

Sequence of stripes


* 4 rows in stockinette stitch with olive thread,
12 rows in stockinette stitch using thread color. fuchsia,
2 rows of garter stitch and purl garter stitch with gray thread,
4 rows in stockinette stitch using thread color. fuchsia,
12 rows in stockinette stitch with pistachio thread,
2 rows of garter stitch and purl garter stitch with gray thread,
4 rows of stockinette stitch with pistachio thread,
12 rows in stockinette stitch with olive thread,
2 rows of garter stitch and purl garter stitch with gray thread,
from * repeat 1 more time, finish with 4 rows of stockinette stitch with olive thread and 26 (50) rows of stockinette stitch with thread color. fuchsia = 166 (190) rows in total.

Knitting density
16 p. x 25 r. = 10 x 10 cm, knitted by a sequence of stripes on knitting needles No. 6;
18 p. x 23 r. = 10 x 10 cm, knitted with an elastic band on knitting needles No. 5 (measure unstretched).

Attention!
The pattern of the back and front is diamond shaped. The dimensions in the instructions always refer to the outer edges. The number of rows of middle loops due to the inclined direction of knitting reaches a height of approx. 83 (95) cm.

Arrow on the pattern = direction of knitting and line of middle loops.

Pattern

Completing of the work

Back
Using gray thread on needles No. 6, cast on 84 (96) loops and for the placket, knit 2 cm = 5 rows with an elastic band, starting with 1 purl row.

Continue work according to sequence of stripes, while for the side edge with an olive thread, cast on another 84 (96) new loops at the end of the 1st front row and include in the sequence of stripes = 168 (192) sts.

For an inclined pattern, first mark the 2 middle loops.

Then in the 3rd row = front row from the placket/starting row, make decreases as follows: knit the 1st middle loop with the previous loop together with the front one, in stripes of purl garter stitch, knit together with the purl stitch; Knit the 2nd middle loop with the next loop together with a knit stitch with a slant to the left (slip the middle loop like a knit one, knit 1, then pull it through the removed loop), in stripes of purl garter stitch, knit the 2nd middle loop with the next loop together with the purl stitch = 166 (190) p.

Repeat these decreases another 81 (93) times on each front row.

After 66.5 cm = 166 rows (76 cm = 190 rows) from the bar/starting row, bind off the remaining 4 loops as knit stitches, 2 loops of which belong to the shoulder and side edges. On the pattern they are calculated at 1 cm.

Before
Knit in the same way as the back, but in a mirror image; to do this, after the bar, first cast on 84 (96) new loops with olive thread, then add 84 (96) bar loops to them.

Sleeves
Using gray thread, cast on 36 (40) stitches on needles No. 5 for each sleeve and knit with an elastic band.

After 3.5 cm = 8 rows from the bar, add 1 x 1 p. to bevel the sleeves on both sides, then in every 12th row 6 x 1 p. (in every 8th row 8 x 1 p.) acc. pattern = 50 (58) p.

After 40 cm = 92 rows from the initial row, loosely close off the sleeves on both sides for piping 1 x 4 (5) sts, then in every 2nd row loosely close off another 4 x (4) 5 sts.

After 44.5 cm = 102 rows from the initial row, loosely bind off the remaining 10 (8) sts.

Attention!
The sleeves are shown unstretched on the pattern; they have a close-fitting cut.

Assembly
Due to the diamond-shaped shape of the parts, make shoulder seams in accordance with. pattern to a length of 20 (24) cm from the beginning row, from the top to a length of 27 (31) cm, between them leave 20.5 (22) cm open for the neck (see marks on the pattern).

Using gray thread, cast on 66 (70) stitches on circular needles along the edge of the neckline, close the work into a ring, knit 1 circular row with knit stitches and 2 circular rows with purl stitches. Then bind off all the stitches like purl stitches.

Sew side seams at the beginning row on the placket and on the next 34.5 (40) cm, on the long edge of the placket and on the next 49.5 (57) cm (see marks on the pattern *).

For armholes, leave 18 (20) cm on both sides to the shoulder seam.

Sew the sleeve seams. Sew in the sleeves, pulling the closed edges of the sleeves accordingly.

Tags: Natalja Published: July 17, 2015 Views: 10305

Mixing two for a jumper contrasting colors, we knit, creating the illusion of sectional yarn. The purl stitch will only enhance and reveal this color effect.

Jumper in a purl stitch with raglan sleeves and a deep neckline at the back.

Dimensions: S/M/L/XL/XXL

Breast: 71-76/82-87/91-97/101-107/112-117 cm

Jumper sizes:

Chest: 82/88/96/104/114 cm

Length: 53/55/57/59/61 cm

Sleeve length: 45 cm

To knit a jumper you will need:

Bergere de France Caline yarn (60% acrylic, 20% wool, 20% polyamide; length = 180m/50g) 200/250/250/300/300 g each, color A and color B

knitting needles 4.5 mm

elastic band 50 cm long and 15 mm wide

Knitting density:

17 loops and 25 rows = 10x10 cm, purl stitch, knitted 4.5 mm, taking yarn in 2 threads (1 thread of color A plus 1 thread of color B).

Description and knitting patterns for a jumper.

The jumper is translated from English.

Purl stitch:

Persons: purl p.

Out r: persons n.

Pearl Pattern:

1 p: alternately 1 st, purl 1.

2 p: knit knit, purl knit knit.

Repeat row 2 constantly.

Back:

Using 2 strands of yarn (A + B), cast on 71/77/83/91/99 sts.

To knit pearl pattern from a height of 6 cm = 16 rows.

Raglan:

At a height of 38/39/40/40/41 cm or 96/96/100/100/104 rows from the set of loops at the beginning, close the next 2 rows by 2/2/3/3/3 p.

Then decrease 1 stitch from each edge as follows: purl 2 stitches, purl 2 stitches together, knit until the last 4 stitches, purl 2 stitches together, purl 2 stitches.

XS: * decrease 1 st from each edge in each knit row 3 times, then decrease 1 st from each edge in the next 4th row *, repeat from * to * 2 times, then decrease 1 st from each edge in each knit row 3 times.

S: * decrease 1 st from each edge in each knit row 4 times, then decrease 1 st from each edge in the next 4th row *, repeat from * to * 1 time, then decrease 1 st from each edge in each knit row 7 times.

M:* decrease 1 st from each edge in each knit row 3 times, then decrease 1 st from each edge in the next 4th row *, repeat from * to * 2 times, then decrease 1 st from each edge in each knit row 6 times.

L: * decrease 1 st from each edge in each knit row 4 times, then decrease 1 st from each edge in the next 4th row *, repeat from * to * 1 time, then decrease 1 st from each edge in each knit row 11 times.

XL: Dec 1 st from each edge on each knit row 24 times.

Neckline:

At a height of 40/41/42/42/43 cm or 102/104/106/106/110 rows from the set of loops, close the middle loop for the neckline and finish each side separately. From the neckline side, decrease 1 st in every 2nd row 14/15/17/18/19 times.

After the last decrease in raglan, knit 1 row on the remaining 4/4/3/3/3 stitches, then bind off these stitches.

Before:

Knit the front and form the raglan as given in the description of the back.

Neckline:

At a height of 48/50/52/54/56 cm or 122/126/132/136/142 rows from the set of loops, bind off the middle 15/17/19/21/23 sts, finishing each side separately.

Close from the side of the neckline in every 2nd row 1 time 3 sts, 2 times 2 sts and 1 time 1 st.

After the last decrease in raglan, knit 1 row on the remaining 3 stitches, then bind off these stitches.

Sleeves:

Using 2 strands of yarn, cast on 39/41/43/45/47 sts. Knit 6 s = 16 rows with a pearl pattern.

Then switch to purl stitch and knit straight 16/14/12/10/8 next to each other. Then add 1 stitch on each side at a distance of 2 stitches from the edge in the next row, then next like this:

XS: 4 times in every 16th row.

S: 5 times in every 14th row.

M: 2 times in every 12th row, then 5 times in every 10th row.

L: 6 times in every 10th row, then 2 times in every 8th row.

XL: 8 times in every 8th row, then 3 times in every 6th row.

Raglan:

At a height of 45 cm = 114 rows from the set of loops at the beginning, close the next 2 rows with 2 sts, knit straight 2/2/0/0/0 rows, then decrease 1 st from each edge in the next row (at a distance 2 loops from the edge), then as follows:

XS: * 1 st from each edge in the next row, 1 st from each edge in the next 4 rows *, repeat from * to * 2 times, then 1 st from each edge in the next row, then 1 st from each edge 3 times in every 4th row, then knit 3 rows on the remaining 23 sts. Close the loops.

S: * 1 st from each edge in the next row, 1 st from each edge in the next 4 rows *, repeat from * to * 3 times, then 1 st from each edge in the next row, then 1 st from each edge 3 times in every 4th row, then knit 3 rows on the remaining 23 sts. Close the loops.

M:* 1 st from each edge in the next 2 rows, 1 st from each edge in the next 4 rows *, repeat from * to * 4 times, then 1 st from each edge in the next row, then knit 3 rows on the remaining 23 sts. Close the loops.

L: * 1 st from each edge in the next 2 rows, 1 st from each edge in the next 4 rows *, repeat from * to * 5 times, then knit 3 rows on the remaining 23 sts. Cast off the loops.

XL: * 1 st from each edge in the next 2 knit rows, 1 st from each edge in the next 4 rows *, repeat from * to * 2 times, then 1 st from each edge 13 times in each knit row, then knit 1 row on the remaining 23 sts. Close off the loops.

Neckline trim:

Using a double thread, cast on 147/153/159/171/177 sts. Knit 2 cm = 5 rows with a pearl pattern. Set aside the loops.

Assembly:

Close the raglan seams. Sew the neckline trim to the neckline, starting and ending in the middle of the back neckline. Close side seams and sleeve seams. Cut 2 strips of elastic and sew in the right place (see pattern and picture).

reverse stitch pullover

This pullover model is knitted using purl stitch. Considering the simplicity of the pattern, even beginners in knitting can cope with such work.

You will need:

Straight knitting needles No. 5;

- circular knitting needles No. 3 - for processing the neckline;

— half-wool yarn - Alize Lanagold (acrylic-51%, wool-49%), sectional dyeing, 4 skeins of 100 g each and a little free time.

Patterns:

purl rook - in the front rows all the loops are purl, in the purl rows all the loops are front;

elastic band 2x2 - 2 knit, 2 purl loops alternately.

purl stitch

Back: On needles No. 5, cast on 64 loops and knit with an elastic band 2x2 (2 knits, 2 purl) - 14 rows.

Switch to purl stitch (or stockinette stitch, whichever you prefer) and knit 19 rows.

In the 20th row of the purl stitch, decrease 1 loop on both sides, knitting together the first 2 and last 2 loops of the row = 62 loops.

After knitting another 11-12 rows, repeat the manipulations with decreasing loops = 60 loops.

After another 10 rows, decrease 2 stitches again - 1st stitch on both sides = 58 stitches.

After 8-9 rows, decrease again by the 1st loop on both sides = 56 loops.

At a height of 76-77 rows (from the beginning of the purl stitch), begin knitting the armholes of the sleeves. To do this, close on both sides of the product, 1 time for 2 loops, and 2 times for the 1st loop = 48 loops.

For the neck: close the middle 10 loops, and after: 1 time 5 loops and 1 time 1 loop from the center = 26 loops, 13 loops on each shoulder.

reverse stitch pullover

Pullover front knit like a back, only you need to start knitting the neckline earlier, approximately 86-87 rows from the beginning of the purl stitch.

To form a V-shaped neckline, bind off the middle 2 loops, and then in each row bind off 1 loop from the center of the product until there are 13 loops left on the knitting needles for each shoulder.

If you want a deeper neckline, start casting off stitches 10 to 12 rows earlier. When there are 36 loops left on the knitting needles, that is, 18 loops for each shoulder, decrease the loops not in each row, but 2 after 2.

Sleeves: cast on 34 loops and knit 8 rows with a 2x2 rib (knit 2, purl 2 alternately). Then go to the purl stitch (in the front rows all the loops are purl, in the purl rows all the loops are front).

After 8 rows of purl stitch, add 1 stitch on both sides = 36 stitches.

After knitting another 14 rows with purl stitch, add again 1 loop on both sides = 38 loops.

Make subsequent additions every 16 rows until you have 42 stitches on the needles. Next, knit evenly.

In rows 63 - 72, from the beginning of the purl stitch, add 1st loop at the end of each row = 52 loops.

Knit rows 73-74 evenly.

Starting from the 75th row, we close the loops to form the sleeve cap: 1 time with 3 loops on both sides, 3 times with 2 loops, 1 time with the 1st loop, 2 times with 5 loops, and bind off the remaining loops.

Assembling the pullover and processing the neck: sew the shoulder and side seams of the front and back, sew in the sleeves. Along the edge of the neckline, on circular needles No. 3, cast on 115 stitches (69 stitches on the front of the pullover and 46 stitches on the back). Distribute the cast-on loops so that the central loop V is shaped neckline was the front one, and on both sides of it knit with a 2x2 elastic band (2 purl, 2 knit). At the same time, in each row, knit 3 central loops together, so that the central loop is on top of the two side ones.

Knit 8-10 rows, and bind off all the loops in a way convenient for you. To get a more elastic edge of the elastic, you can use a little trick - when closing, knit the purl loops with purl loops, and close the front loops with the front ones.

reverse stitch pullover

The purl stitch pullover is ready! Have a cozy walk in your new clothes!

purl stitch pullover, knitted pullover, knitted pullover, knitting patterns

44 Italian size

Materials

Yarn Lana Gatto SUPERSOFT shade (100% wool, 50 g/124 m) 6 skeins, circular knitting needles 4.5 mm

Knitting density

16 stitches and 24 rows = 10x10 cm in purl stitch

Description of a knitted sweater for women

Double elastic band
Row 1: k2, *slip 1 p, k1, repeat from * to end of row.
2nd row: thread before work, remove 1 stitch as purl, * 1 knit stitch, slip 1 stitch as purl, thread before work, repeat from * to end of row, 1 knit stitch.
Repeat rows 1 and 2.

Double tourniquet(knitted in 8 sts):
Row 1: knit 8
2 and all purl: remove 2 stitches for extra. knitting needle at work, knit 2 and 2 persons.p. with additional knitting needles, remove 2 stitches for extra. knitting needle before work, knit 2. and 2 persons.p. with additional knitting needles
Rows 5 and 7: knit 8.
8th row: 8 p.p.
Repeat rows 1-8.

Openwork pattern(knitted in 4 sts):
Row 1: knit 4
2nd row and all purl: 4 purl.
Row 3: k2, yarn over, k2 together.
Row 5: knit 4
7th row: 2 stitches together, yarn over, 2 stitches.
Row 8: purl 4
Repeat rows 1-8.

Back

Cast on 70 sts and perform 6 rows with double rib, then continue knitting with 2x2 rib (k2, p2). After 5 cm, continue with purl stitch to a height of 34 cm from the cast-on edge. For the armholes at the beginning of the trace. For 6 rows, cast off 2 stitches and continue knitting to an armhole height of 18 cm. For shoulder bevels, cast off 8 stitches at the beginning of the next row. 4 rows. Bind off remaining 26 sts of neckline.

Before

Cast on 74 sts and rib as for the back, then continue: 1 st in purl stitch, openwork pattern, 3 purl stitches. satin stitch, openwork pattern, 3 p. satin stitch, double harness, 3 p. satin stitch, openwork pattern, 14 p. stitch and then finish the row symmetrically. Continue knitting according to the pattern and after 34 cm from the cast-on edge, make armholes for the sleeves as for the back, knit at the same place in the center of the part, starting from the trace. knit stitch: bind off first 2 stitches, 3 stitches with stockinette stitch, 3 stitches with purl stitch. satin stitch, 4 p. openwork pattern, 3 p. purl. satin stitch, 8 p. double strand, 1 p. purl. satin stitch, 2 p. together purl. (further knit this loop in satin stitch), 4 p. openwork pattern, 1 p. satin stitch, 1 p. from broach, 12 p. satin stitch, 1 p. from broach, 1 p. satin stitch, 4 p. openwork pattern, broach (remove 2 p. together on right knitting needle as knits., slip the loops back and insert the right knitting needle behind back walls loops, i.e. first for the second, and then for the first loop; knit both loops together purl), then finish the row symmetrically.

Next knit in a row according to the pattern, closing 2 stitches for the armhole. Track. Start the row by closing the loops and then perform increases and decreases in the center front in the same way, but now there will be 14 purl stitches between increases. satin stitch, and decreases are made after and before the double stitch.

Next dits.r. knit: 2 stitches in stockinette stitch, 4 stitches in openwork pattern, 3 stitches in purl stitch. smooth, 7 sts. satin stitch, 2 p. together purl, 4 p. openwork pattern, 1 p. purl. satin stitch, 1 p. from broach, 16 p. satin stitch, 1 stitch from broach, finish row symmetrically.
Continue knitting in the same way, making decreases on the outside of the pattern and increases on the inside.

After 14 cm from the start of knitting the armholes of the sleeves for the neckline, close the center. 14 sts and then finish both parts of the front separately, decreasing 2 sts on each side 4 times in the neckline. Then perform the shoulder bevels as for the back. There will be no loops left on the knitting needles.

Sleeves

Cast on 38 sts and knit with an elastic band as for the back, then continue purl. stitch, adding 1 stitch on each side in every 8th row 9 times = 56 stitches. After 44 cm from the cast-on edge for the sleeve roll, close 2 stitches at the beginning of the next stitch. 4 rows and then decrease 1 stitch on each side in every 2nd row 11 times, then cast off 2 stitches at the beginning of the next row. 4 rows. Cast off the remaining 18 sts.

Assembly

Sew the right shoulder seam. Along the edge of the neckline from the faces. on the sides, cast on 74 sts and knit with an elastic band 2x2 15 cm, close the loops according to the pattern. Sew left shoulder seam and collar. Sew in the sleeves and sew the side seams and sleeve seams.

Dimensions

36/38 (40/42) 44/46

You will need

Yarn (75% polyacrylic, 25% polyamide; approx. 120 m/100 g) – 500 (600) 600 g melange; knitting needles No. 8 and 9; circular knitting needles No. 9.

Patterns

Rubber

Alternately 1 knit, 1 purl.

Facial surface

Front rows - front loops, purl rows - purl loops).

Purl stitch

Front rows - purl loops, purl rows - front loops.

Knitting density

9 p. x 14 r. = 10 x 10 cm, knitted with the basic pattern using knitting needles No. 9.

Pattern

Completing of the work

Back

On needles No. 8, cast on 42 (48) 54 loops and knit with an elastic band.

After 5 cm from the starting row, switch to needles No. 9 and continue knitting, distributing the loops as follows and adding 1 p. 1 p.: 1 chrome, 10 (12) 14 p. stockinette stitch, 21 (23) 25 p. purl stitch, 10 (12) 14 p. stockinette stitch, 1 chrome. = 43 (49) 55 p.

The areas of the front surface gradually expand towards the sides!

At 11 p.m. from the bar (= front row) knit as follows: 1 chrome, 8 (10) 12 knit, 2 knit stitches together, knit 1 purl crossed stitch from the broach, 21 (23) purl 25, 1 purl crossed stitch knit from broaches, 1 p. remove, as in knitting, 1 knit, pull the removed loop through it, 8 (10) 12 knit, 1 chrome. In every next 10th r. repeat the decreases and increases accordingly 5 more times.

Then distribute the loops as follows: 1 chrome, 4 (6) 8 stitches in stockinette stitch, 33 (35) 37 stitches in purl stitch, 4 (6) 8 stitches in stockinette stitch, 1 chrome.

After 59 (61) 63 cm from the initial row, close on both sides for shoulder bevels 3 (3) 4 p. and in each next 2 r. close on both sides another 3 x 3 p. (3 x 4 p.) 1 x 4 p. and 2 x 5 p.

After 65 (67) 69 cm from the initial row, bind off the remaining 19 sts.

Before

Start knitting like the back, but after 57 (59) 61 cm from the starting row, close off the middle 5 stitches for the neckline and finish both sides separately.

To round, close along the inner edge in every next 2nd row. 1 x 3 p., 1 x 2 p. and 2 x 1 p.

Perform shoulder bevels as on the back.

Sleeves

Using needles No. 8, cast on 24 stitches for each sleeve and knit with an elastic band.

After 5 cm from the starting row, switch to needles No. 9 and continue knitting with purl stitch, while in the 1st row. add 1 p. = 23 p.

For side bevels in every next 12th r. from the bar add 4 x 1 p. on both sides (in each next 10th row from the bar add 2 x 1 p. on both sides and then in each next 8th row another 3 x 1 p.) in each next 8th r. from the bar add 3 x 1 p. on both sides and in each next 6 p. add another 3 x 1 p. = 31 (33) 35 p.

After 45 (42) 40 cm from the initial row, close the sleeves for piping on both sides 3 p. and in each next 2 p. close off another 5 x 2 sts on both sides.

After 53 (50) 48 cm from the initial row, close off the remaining 5 (7) 9 sts.

Assembly

Lightly moisten the parts, stretch them according to the dimensions indicated in the pattern and leave until completely dry.

Mattress seam sew shoulder seams.

On both sides of shoulder seams along the side edges of the front and back, measure down 18 (19) 21 cm and put marks. Sew the sleeves between these marks, stretching the sleeve cap slightly so that it “fits” evenly into the armhole.

Use a mattress stitch to sew the side seams and sleeve seams.

For the neckline, cast on needles No. 9 along the edge, evenly distributing, 48 stitches and knit in circular rows. After 22 cm, close the loops. Turn the collar right side out.

Photo: Verena magazine. Special issue" No. 3/2015