Zaichikov the warrior. By the way, such bunnies can be given to colleagues as gifts.
For sewing shoes for dolls prepare:
Skin of the desired color;
Fabric for lining (for example, jeans);
Laces (about a meter long);
Thin tape;
Rubber for the sole with a tread (can be bought at a shoe store);
Thick cardboard for making insoles (thin!);
Glue "Moment" - Universal or Crystal;
Eyelets (small rings for holes for laces);
Punch and flaring for installing eyelets;
Scissors (large and small).
Shoes for dolls master class:
1. We start by printing out the pattern. But keep in mind that the pattern still needs to be tailored to the specific toy. You may have a different fabric, as well as the density of the padding, the thickness of the leather in the end. So remember to try on before cutting and sewing. Open the skin without damaging it appearance, will not work.
Shoes for dolls pattern:
2. Of course, first we need to sew the legs of our toy. I have a bunny. Here are the cut out details:
3. When you sew, leave a hole for filling. I won’t describe how to sew the legs, it’s simple. Try on and cut out a liner from felt or thick felt. You can chamfer - cut the edge at a slight angle. Compare: in the photo one liner has a chamfer, the other does not.
4. Next, we glue our thick liners from the inside of the legs to the sole with glue (preferably Moment Crystal glue). I prefer felt to give stability to the legs compared to cardboard, as it will withstand washing well if necessary.
6. Finally we got to sewing shoes, because the master class is called “how to sew shoes for dolls”!
Use a special leather marker to trace the pattern and cut it out.
7. First sew the darts on the toes. Afterwards, cut them and glue them. It is better to glue the skin like this: smear it, wait, smear it again and glue it. Here's a photo from the inside: 
8. Next you need to cut out and glue the lining. Be careful, the lining is smaller and needs to be applied as shown in the photo. The hem area should be clean. Don't overdo it with glue. But if you don’t top it up, it may not stick.
10. Now a sewing machine will come in handy.)) Very carefully along the edge, stitch the backdrop from A to A1. Stuff holes and install eyelets for laces.
11. It's time to try on. If everything suits you, let’s look at approximately how much allowance you need to leave when stitching. The darts must be strictly in the center. In this case, you can sew the sock to the heel. At the end, try it on again.
12. When the toe and heel are assembled, without removing the foot, measure the insole (pattern). It should not sit end to end, but with gaps of 1-2 mm. Otherwise, the edge of the shoe will look like a duck's beak. Does everything fit perfectly? Then use a marker to draw a line for hemming and cutting the cloves.
13. We make the insoles from thick cardboard and glue the inside with fabric (jeans).
14. Trim the teeth with small scissors and glue in the insole.
15. It’s time for the sole. Try on the pattern and adjust if necessary. The sole will be made of rubber with tread. We also glue in two stages (smeared - dried - smeared - pressed) Immediately (!) remove excess glue!
16. Cut the 90 cm cord in half, and wrap the cut edge with tape so that it does not fray.
17. All that remains is to glue the tongue (but you can sew it on earlier), lace it up and let the boots dry for about 6 hours.
All, ready. It's time to put on our little eared shoes!
Dear friends, there are still a few more to come master classes on the topic "How to make shoes for dolls", so subscribe to " " in the sidebar and don't miss anything! See you!
Hello, dear guest and doll lover. I sewed simple ones. If your doll needs light shoes, sew the same ones with your own hands.
I have shoes for doll, bought in a store - these are two pairs of shoes.
The first pair of shoes is made of leather, with an excellent sole, with a heel, and a button closure. When I bought a doll, I chose between two similar ones. Beautiful shoes determined my choice.
The second pair of shoes is much simpler, but fits several dolls, which is very convenient for photography.
I make the rest of the shoes myself. So far these are very simple shoes, mostly made of fabric. Shoes for the doll can be bought in the store, but, firstly, they are quite expensive, and secondly, I want to make everything for my favorites myself.
The advantage of such simple shoes is that they can be sewn to almost every outfit; they can be any color. These shoes are sewn to a blouse trimmed with the same fabric.
The shoes look better than socks on tall dolls. For babies, I most often sew socks.
Burgundy and spotted shoes look different, but they are sewn from the same pattern. These shoes can be decorated with buttons, bows, beads, and embroidery.
They are sewn from two parts: sole and top.
CUTTING AND SEWING SHOES FOR A DOLL
Simple shoes for a doll can be made to go with every outfit.. Sewing shoes is very easy.
Girls dream of dolls with a variety of beautiful outfits. Finding such an outfit can be difficult. Especially when it comes to shoes.
Then a variety of master classes come to the rescue, which will always help you make extraordinary shoes, boots, sneakers, slippers and many other shoe options.
Making shoes for Barbie with your own hands is quite simple; you just need your time, materials and, of course, following step-by-step instructions.
Make your child happy with a couple new shoes you can make dolls using a simple pattern.
How to make shoes for a doll: master class
To make Barbie shoes you will need the following materials.
- Thick paper, paper clips.
- Wire cutters, PVA glue, Moment glue
- Satin ribbon and fabric of the same color.
- Ruler to make the heel.
How to make shoes for a doll with your own hands, and what are the features of sewing shoes? Using pattern And step by step instructions, you can sew a high-quality pair of shoes.
The last step in creating the shoes is to put them on the fashionista and apply tape to the insole. DIY shoes for doll feet are ready! In the same way using a pattern you can make boots, boots and even sneakers for your daughter’s doll.
Gallery: DIY doll shoes (25 photos)
DIY shoes for dolls, shoe master class
You already know how to make shoes for dolls, but you can also create shoes or boots. To make shoes for Barbie you will need a little time and basic materials.
Materials you will need:
- The upper part of the boots is best sewn from leatherette, felt or genuine leather.
- It is best to make the lining of future boots from felt. But if your boot top is made of genuine leather, then you don’t have to install a lining.
- You will also need cardboard - these are the insoles of the future shoe.
- It is best to choose thick cardboard for the sole material.
- It is best to glue parts with Moment glue, which will quickly allow you to glue even parts such as leather.
When the materials are in front of you, measure the length of the sole of the future shoe. It should be at least four centimeters if you are sewing for a large baby doll. Pattern can be downloaded from the Internet and adjusted to the size of your doll.
Advice: if you make shoes baby doll made of textiles, then do not forget about allowances (1–2 centimeters) for sewing together the parts.
You can decorate future boots any in a convenient way. You already know how to sew shoes for a doll, boots or boots for a baby doll, because this simple process. To do this you need to make a little effort, show fantasy and everything will definitely work out. Barbie shoes and clothes are what your little princess dolls should have. It is best to decorate shoes with children, for example, with rhinestones.
Any girl, whether big or small, loves to play with dolls. And not just to play, but also to sew outfits and shoes for her. Nowadays, there is a whole industry for creating both one and the other. And sometimes even world-famous designers create outfits for Barbie dolls. Of course, these are oh so expensive. And often they are created manually, since the size of the product simply does not allow the use of technical devices. And this makes their price increase even more. To create, you first need patterns and sketches. That is why in this article we will look at how to create shoe patterns for dolls with your own hands. And let's look at this different types dolls having different shapes and foot size.
Where to get ideas
In order to create a pattern, you must first draw a sketch. And in order to draw it, you need to have a more or less clear idea of what it will look like future shoes. That is, there must be an idea. And where can I get it? The idea for shoes is usually developed either together with the main costume, or after it is ready. Before making shoe patterns, look for something suitable for your doll in books or magazines, among the shoe models presented in stores. It is also worth delving into historical sources if the image of your dolls is related to historical characters or time periods. But in general, inspiration can be found anywhere.
Ways to create doll shoes
Shoes for dolls are produced different ways. It can be glued. And this is one of the most common ways to create various shoes and sandals. Shoes can be sewn. Especially one that has high tops or does not have a thick sole. It could be booties. Shoes can also be crocheted or knitted. But there is another method that is especially successfully used on textile dolls. Shoes can simply be painted with acrylic paints. This method is good because it does not limit you in anything at all. With the help of paint and brushes, you have the right to draw anything, without worrying at all that your idea cannot be completed or that you suddenly cannot find necessary materials. But there is one significant drawback. These shoes are forever. You won't be able to rid your doll of it. Therefore, the most convenient and interesting option- is to make shoes that are beautiful, unusual, realistic, and at the same time replaceable. It is in this case that we cannot do without patterns.
What are doll shoes made of?
A wide variety of materials are selected for doll shoes. It can be leather and leatherette, jeans and others. The sole is usually made of cardboard or cork material. Soft and elastic materials are often used to create shoes. Such fabrics that easily take the desired shape. It all depends on your idea. It is better to make boots from leather or its substitutes, shoes from bright, shiny or satin materials, but booties or slippers from cozy fleece. If you want to make shoes from lace, then it is better to treat it, for example, with a sealant so that it holds its shape. In general, you can use almost anything. The only difference is the complexity of processing the material.
Additional decorations
In addition to the main material, you will need all sorts of additional decorative elements. It could be tapes beautiful threads, lace, beads, beads, eyelets, sequins. As well as thin laces, hanging elements and various other no less interesting materials. It all depends on your imagination.
Tools and materials
Of course, you will need thread and needles. And also scissors. Don't forget to buy good glue. After all, very often shoes for a doll have to be glued rather than sewn. Also a very useful thing when creating shoes for dolls is an eyelet installer. Eyelets are available in metal and plastic. They are installed on the holes, thereby strengthening the fabric around them. These reinforced holes are used to tighten the laces. It would also be a good idea to have in your arsenal acrylic paints for touching up the necessary details.
Basic principles for creating do-it-yourself shoe patterns for dolls
There are certain principles in the development of shoe patterns, as well as in design. So to speak, the basis from which they then model various shapes and models. Creating a shoe pattern for dolls with large feet, as well as with small ones, begins with the insole.
Work should begin with the contour of the foot. To do this, place the doll’s leg on a sheet of paper and trace it. Now we decide on the shape of the shoe and finish drawing the toe. After all, you need to narrow the insole a little in three places. This place thumb, the widest place on the foot, as well as the instep area. All this is necessary so that the shoes ultimately fit the foot better. Second important point is the construction of the upper part. To do this, you need to measure your leg with a centimeter in several places. Using the results of these measurements, of which there must be at least three, we create a form. Of course, you will have to adjust it for the most part. Just apply the paper base to your leg and determine where and what needs to be adjusted. Don't forget to measure the height of the backdrop. This will be the basis of any pattern. The sole matches the insole, but is wider by a couple of millimeters. When the base is ready, you can use it to create almost any model.
Boots for dolls with large feet
In this section of the article we will try to figure out how to make shoe patterns for big-footed dolls with our own hands. Let's look at this process using shoes as an example. First, an insole is also created according to the shape of the sole.
To sew boots, you need to understand what parts these shoes consist of. In addition to the insole, the shoe must contain side parts, as well as a top and a “tongue”. After completing the insoles, we proceed to the side parts. They can be cut in one piece or consist of two. But then they are sewn together, and the seam is located at the back. In order to create side shoe patterns for big-footed dolls, you need to measure the length of the side part. From its beginning on one side, through the heel and to the end on the other side. As well as the length of the top of shoes or boots. If you have two parts planned, then the constructed pattern should be divided into two parts exactly in the middle.
To create boots, it would be nice to have an eyelet installer. With its help, the holes made in the side parts are strengthened. The laces will be tucked into these holes. Now let's make a pattern for the top part. To do this, we take the insole as a basis and cut out the upper part according to its shape and extend it to the required length so that it goes into the “tongue”. When all the shoe patterns for big-footed dolls are ready, cut them out of fabric and put them together. And when everything is already sewn and glued to the insole, we make the sole and attach it to the shoe. It is better to assemble shoes directly on the doll. Just wrap your foot with cellophane first so as not to glue the shoe directly to your foot. You can decorate the finished shoe as you wish.
Sandals for Barbie
Shoe patterns for Barbie dolls are quite easy to make. First of all, the contour of the foot is created on necessary material and duplicated on thick cardboard. The shape of the sock is drawn additionally, if necessary. For example, if you want to make a pointed toe or an elongated one.
The fabric base is glued to a cardboard blank and bent to the shape of the foot. The top of the sandals is cut out according to the shape of the toe of the sole. A small allowance is made along the edge and notched along the entire length. It is needed to glue it to the sole part. To do this, apply the sole and upper part to the leg and fold the cut seam allowance onto the lower side. We glue everything with reliable glue. In the same way, we create a backdrop, which we cut out immediately with the strap and attach it to the heel. Make a loop on the strap and sew a bead to the back. Using wooden skewers, you can make a heel for sandals.
To do this, cut the required length of the skewer and cover it with the same fabric. Now all that's left is to glue the heel to the sandals - that's all. You can put on the beauty's shoes.
Shoe patterns for Monster High dolls
Monster High dolls are very popular today. Girls love to create not only furniture and rooms for their toys, but also clothes and shoes. Do-it-yourself shoe patterns for Monster High dolls are made similarly to those for a Barbie doll. Let's look at them using the example of creating high boots.
Two blanks are cut out of a suitable fabric in the shape of the legs so that their length ends half a centimeter below the toes. The piece is wrapped around the leg and stitched so that it fits tightly around the leg. It is better if the fabric is slightly elastic. The seam should be placed at the back, its length should reach the heel. In the same way as for a Barbie doll, we make a sole out of cardboard and bend it to the shape of the leg.
We apply the cardboard blank to the doll’s foot and, cutting the edge of the boot, glue it to the sole, and on top we glue another, final sole and heel, which is done in the same way as for Barbie sandals.
Slippers for Tilda
Shoe patterns for Tilda dolls are created according to the principles already discussed earlier. An insole is created from cardboard, which, for beauty, is covered with the same fabric from which the entire slipper will consist. We attach the insole to the sole and glue the top of the slipper onto it. To hide traces of fixation, a sole is attached below. It is better to choose a denser fabric for shoes, but the sole should not be too hard, otherwise, after making the slipper, it will be difficult for you to put it on the doll’s foot. All that remains is to make your slippers more exclusive. You can achieve this with the help of unusual decoration.
Booties for Baby Born dolls
Now a fairly popular doll is Baby Born. Kids love to play with her, and the process of playing certainly includes changing outfits and shoes. Therefore, we will definitely sort out shoes for
Most often, booties are created for these dolls, because these dolls are so similar to babies. But this does not change the meaning of creating a pattern. We still outline the sole, but we don’t need to narrow any places. And we create the top according to the same principle as described earlier. The cutout on the bootie-slipper, if necessary, is done by eye. Only the distance from the fingertips to its supposed beginning is measured in advance. In this case, the top and sides are cut in one piece. A seam is made at the back, and then the upper part is attached to the lower part using a blind seam. Booties do not have a dense sole, so in this case everything is connected with a needle and thread. And, of course, don't forget about decoration.
We have considered various options creating shoe patterns for dolls with your own hands. Great attention should be paid to details and decor. After all, they are the ones who make it unique, unlike any other. And this is exactly what every master wants to achieve. And not only beginners, but also those already experienced. Therefore, do not be afraid to show your imagination. The main thing is to remember that everything should be in moderation and compatible.
Patterns of shoes for big-footed dolls , collected in this article, will be useful for lovers of these cute textile dolls.
After all, any dollmaker - be it big or small - loves to dress up her dolls. And many doll lovers simply love to create clothes for their pets with their own hands.
Today in the world of dolls there is a widely developed industry for sewing outfits for little fashionistas. Even famous designers create outfits for dolls. However, often clothes and shoes for dolls are very expensive. So much so that it’s easier to sew or make everything you need on your own.
Especially if we are talking about a unique big-legged doll that you sewed yourself. For such dolls, as a rule, the owners sew clothes and shoes themselves. Today we decided to talk about the intricacies of creating boots for big-legged dolls.
In order to sew boots for your doll, you will need, first of all, patterns and sketches tested and tested by masters. Based on them you can make your own patterns and sew something new for your doll.
This inspired us to create a series of articles in which we decided to collect the most popular shoe patterns for big-footed dolls. And we decided to start with the simplest master class on sewing textile boots for your doll.
Shoe patterns for big-legged dolls: boots. Master Class
This is how a small photo master class on making boots for a doll fashionista turned out.
Textile dolls, as a rule, do not have standard sizes and are sewn by each housewife according to the dimensions that suit her.
Therefore, measurements are taken from each model individually and transferred to shoe patterns for big-legged dolls . When cutting fabric, do not forget to leave seam allowances.
How to dress up big legs
Let us remind you that big-legged dolls or snowball dolls are a very popular type of textile dolls. They usually range from 25 centimeters and above. Proportions are what unite the big dolls sewn by different craftswomen and make them different from other dolls. These textile dolls have a large head and legs, small eyes embroidered or drawn exactly in the center of the round face.
Bigfoots are often called snowballs because housewives like to dress them up in sweaters and hats with pom-poms.
Also on centipedes you can often see fur capes and warm boots, felt boots and raincoats, coats and ponchos. Big legs love to be wrapped up warmly - this is the custom among lovers of these textile dolls.
The big leg must wear not only a hat or headband, but also shoes, as well as socks or knee socks.
