People have been breeding rabbits for a long time, eating their meat and sewing products from skins. In terms of prevalence, rabbit fur ranks first among natural materials for coats and hats. I wonder how you can clean rabbit fur. It's time to find out about this in order to extend the age of your outerwear.

Folk remedies for cleaning fur

If you try the rabbit fur to the touch, you will understand why it should not be pulled and brushed with too hard brushes. It is very gentle, soft, and the villi are thin. All this makes us treat him with respect.

Talc

To gently dry the way to clean rabbit fur, you can use starch or talc.

• The powder is evenly scattered over the surface of the product, lightly rubbed it.
• It will absorb dirt and grease and thereby clean your fur coat, hat or collar.
• The powder is removed by shaking off the fur and combing it out with a comb. You can use a pet comb or a wide-toothed comb.

You can also vacuum gently on a very low setting so that no foreign matter remains between the hairs.

Semolina is also used as a powder at home. It collects dust and small particles of dirt very well. Note that this method is applicable to white fur.

Bran

Since we are now talking about cleaning rabbit fur at home, we should tell you how to clean it with bran. Bran is poured into a clean (!) Frying pan and heated. Moderately hot bran is scattered over the fur, rubbed in like talcum powder, then shaken off and combed out. It is necessary to comb the rabbit fur in the direction of its growth, so as not to accidentally damage the hairs.

Sometimes it is advised to sweep them with a broom or brush. You can only do this if your broom is spotlessly clean. Otherwise, pollute an expensive fur coat or hat even more.

Peroxide

Capes and hats made of white rabbit look very nice, but it tends to turn yellow, especially after getting wet and improperly drying. To remedy the situation, try at home to use a popular medicine and cleaning agent - hydrogen peroxide. It is mixed with a small amount ammonia(a cup of water + a tablespoon of peroxide + ammonia) and sprayed on the surface of the fur. In this way, you can clean a large fur coat and clean a small one. white collar or cuff.

Vinegar

A good way to clean dark or white fur is to use vinegar. 9% table vinegar is diluted in half with water, a cotton wool is dipped in this composition and passed over the surface. You can also use a more aggressive substance - vinegar essence. It is very effective to clean any fur, collecting dirt with a cotton swab. However, it is necessary to act carefully, quickly and strongly without wetting the wool.

How to freshen up a rabbit fur coat

If you want to wash rabbit fur, then here you need to hit the brakes. The fur coat cannot be washed, because at best it can sit down, and at worst the fur falls off and the core is torn.

Do not dare to dry-clean your fur coat? Then use this method.

• Cover it with a damp sheet and beat out the dust.
• Then wipe with a swab dipped in vinegar and dry.
• When the wool has become dry, it is rubbed with glycerin (buy at the pharmacy) to give softness and shine.

A white rabbit fur coat can be cleaned, as we have already said, with bran, talc or semolina. Then spray with water from a spray bottle, comb with a brush for animals.

Cleaning a hat or collar

As for smaller items, they are often washed at home. The rabbit collar is unfastened, placed in a basin with slightly warm water and soft water diluted in it. detergent. Wash without spinning and rinse. They are pulled out of the water, allowed to drain and dried away from heaters, periodically combing. Wash the hat in the same way.

If there is a need to clean the lining in the hat, then the rabbit fur is torn off. The lining should be washed separately, and the hat, that is, the fur, should be pulled over the jar and cleaned using one of the dry methods, either with vinegar or peroxide.

It happens that general state fur coat is normal, but the collar needs cleaning. In this case, proven means are used. Separate spots on rabbit fur must be cleaned with gasoline or ammonia. These substances are able to cope with the most problematic greasy places in which the collar rubs against the neck.

If a rabbit fur coat gets wet, the fur is wrinkled and dried improperly, then it does not make a very pleasant impression. To prevent this from happening, you need to hang a fur coat on a coat hanger and comb it. Do not use a hair dryer or heaters, as this can change the color of the fur. This will be especially noticeable on a white product.

If your rabbit is 4 or more years old, then no amount of cleaning will help. This is the approximate service life of the product, after which even dry cleaning will not take it into service. In the meantime, this time has not come, you can enjoy the warmth and softness of a rabbit coat.

Rabbit fur outerwear is warm and beautiful. Like any thing, she needs proper care: timely and proper cleaning. You can clean fur clothes in dry cleaning, but knowing how to do it right at home, you can do it yourself. The following tools are suitable for this:

• talc;
• vinegar;
• hydrogen peroxide;
• bran;
• semolina;
• ammonia;
• petrol;
• starch;
• soft brush.

Bran, talc and starch

Starch, semolina and bran are naturally occurring sorbents - they absorb dirt and grease without having a chemical effect on clothes. Talc has an inorganic (mineral) nature, but it also adsorbs organic contaminants well and is safe for fur products. With all these means, you can clean the fur at home. The technology for removing contaminants using bulk materials is the same:

• apply starch to a hat or fur coat;
• rub it into the fur with light movements;
• leave for a while - 15-30 minutes;
• shake out the fur product and comb out the remaining starch with a soft brush.

Starch and talc can be mixed with bran or semolina in a ratio of 1: 2 - 2 parts of cereal or bran and one part of starch or talc. When cleaning a fur coat or hat from the remnants of bulk materials, you need to act very carefully and make movements in the direction of the growth of the villi. Rabbit fur is delicate, and the villi are thin. If you use a hard brush or make sudden movements when cleaning, you can damage the fur product.

Absorbing dirt, sorbents change their color. Cleaning should be done until the starch or talc remains white.

Grandma's Secrets

Previously, when a lot of snow fell in winter, it did not turn gray from car exhaust and production waste, a fur coat was cleaned in frosty weather outside. She was laid out with a pile down to the snow and knocked out. As a result, all the dust and dirt came off the fur coat, it became clean and shiny. Today, only residents of ecologically clean areas have such an opportunity, where there is enough snow in winter.

However, in a similar way, you can still clean the fur at home by replacing the snow with a damp white cotton cloth:

• hang a coat on a coat hanger;
• wrap it in a damp, clean cloth;
• knock out.

In case of severe contamination, you need to change the cloth to a clean one and repeat the process. After the dust is removed, you can move on to cleaning organic contaminants - greasy places on the collar or sleeves and, if necessary, stains.

Stain removal

If a fur coat is accidentally splashed with grease, it is not necessary to use strong stain removers. A 1:1 solution of water and vinegar will also help remove stains at home. Organic dirt on the collar and sleeves is removed in the same way. You can also use this recipe:

• 400 ml of water;
• 1 st. a spoonful of ammonia;
• 3 art. spoons of salt.

Half an hour after applying the solution, the spot with the stain should be wiped with a clean, damp cloth, and then dry with cotton or linen. Another good way- "White spirit", mixed in equal proportions with ammonia. After application, it must also be removed with a damp cloth.

Hot wheat or rye bran is an option for removing stubborn grease stains that cannot be removed by other methods. To do this, bran is placed on a heated and, of course, clean frying pan. Stirring, heat them up to about 50 degrees. You can determine by touching the bran: as soon as the hand becomes hot, the desired temperature has been reached. After that, the heated mass is rubbed into the problem area until the stain disappears.

How to clean the lining?

Often in furs, the top is clean, and stains appear on the lining. In order not to tear it off a fur coat, you can use the following methods.

• Sweat stains on the lining of a fur coat can be cleaned by applying a mixture of denatured alcohol and ammonia in equal parts.
• A soap solution is also suitable for lining fabric, but it must be applied carefully so that moisture does not get on the core.
• Spray "Amway" - an ideal tool for removing dirt from the lining fur coat at home. It is enough to apply it to the pollution, and then remove it with a clean sponge.

"White spirit" can be replaced with refined gasoline (gasoline for lighters has a high degree of purification). In this case, the proportions in the solutions remain the same.

How to clean white fur?

White fur tends to acquire a yellowish tint over time. The following solution will help remove it:

• ammonia - 0.5 tsp;
• hydrogen peroxide - 1 tsp;
• water - 200 ml.

With a cloth soaked in such a solution, wipe the fur and allow it to dry. You can also make a slurry of burnt magnesia (magnesium oxide) and refined gasoline. It is rubbed into the fur of a rabbit, and after a while the fur coat, cape or hat is shaken, and the remains of the gruel are carefully combed out. The fur product should dry naturally, without the use of a hair dryer and other heating devices. The disadvantage of this method is the smell of gasoline. To remove it, after complete drying, wipe the fur with a sponge dipped in an aqueous solution of vinegar (ratio - 1: 1). But even without vinegar, the smell disappears within a week.

Before removing yellowing, it is necessary to clean the fur product from dust and dirt using starch or bran.

Precautionary measures

Any fur, and especially rabbit fur, is a delicate material. Careless actions can ruin it forever. To clean a fur coat or cape and not aggravate its condition, you need to remember a few “taboos”:

• in no case should you wash fur things;
• it is not recommended to use strong chemicals to remove stains;
• no need to comb the fur with a comb with frequent teeth;
• do not dry fur clothes on a radiator or with a hot hair dryer.

Remembering these simple rules, you can cope with pollution on your own and wear your favorite fur coat for many years.

Rabbit fur products are among the most frequently purchased on the domestic market. It is not surprising, because not only fur coats are made from it, but also collars and hats. However, many owners of such things are faced with a problem that relates to cleaning fur. You will learn how to clean a rabbit fur coat at home from this article.

Grandma's secret to getting rid of dust

At a time when there were almost no cars, and most of the snow was white, not brown, fur coats were cleaned right on the street. To do this, they laid it with a pile on the snow and carefully beat it out. In the end, all the dust that accumulated in the garment fell on the snow. The result is a perfectly clean coat. Now this method will be relevant only for residents of ecologically clean areas.

However, there is another way to clean such a piece of clothing - it will be relevant for residents of megacities. To implement it, snow is replaced with pure cotton matter, after which:

1. Hang a piece of clothing on a hanger.
2. Wrap it in pre-moistened cloth.
3. Carefully knock out a piece of clothing.

Important! If the contamination is severe, you can replace the fabric and repeat the procedure. After all the dust has been removed, you can begin to get rid of stains and greasy places.

Fur of any type, including rabbit fur, is, first of all, a delicate material. If measures to remove contaminants are inaccurate, you can permanently spoil the material. Before you carry out this procedure, you need to remember a few points:

• Washing rabbit fur in the machine is strictly prohibited.
• It is unacceptable to use strong chemicals when removing stains.
• Do not comb the pile with a brush with frequent teeth.
• It is forbidden to dry the fur product on a battery or using a hair dryer.
• To prevent yellowing of a white rabbit coat, it must be wrapped in a tight cover of a dark cold color. It is better to store such a fur coat in a cool place.
• For cleaning rabbit collars and hats, it is better to use cleaning products in a gel consistency.

Taking into account these rules, you can significantly extend the life of an expensive item and enjoy its warmth for a long time.

The main methods of cleaning fur products

Before using the methods that will be described below, it is necessary to test their effectiveness on an inconspicuous area of ​​\u200b\u200bthe clothing. To do this, you need to apply a cleaning agent, wait 15 minutes, then remove it and objectively evaluate the result. If it did not affect the product, feel free to use this method.

The use of hydrogen peroxide

This method is ideal in the fight against yellow spots caused by improper drying or long contact with water. In addition to a fur coat, in this way you can wash a rabbit hat, for this you need to follow the following algorithm:

1. Mix 30 ml of 6% hydrogen peroxide, 300 ml of pure water and 20 ml of ammonia.
2. Pour the resulting solution into a spray bottle.
3. Spray it on a piece of clothing at a distance of 30-40 cm. Each drop should lie evenly over the entire surface of the product.
4. Gently brush through the pile.

Important! In this way, both the entire product and its individual parts (for example, the collar and sleeves) can be cleaned.

The use of semolina

Necessary materials:

• Vacuum cleaner (you can use a car).
• Basin or other container.
• Semolina. It can be replaced with regular potato starch.

Important! If the fur product is heavily soiled, it is recommended to remove the fur part from the lining and wash each part separately.

To clean a rabbit fur coat at home, you must follow the steps below:

1. Pour about 10 liters of warm water into the prepared container, adding 1.8 kg of cereal or starch to it.
2. Dip the fur in the liquid, rinse well and shake it thoroughly.
3. When all manipulations are completed, walk over the treated surface with a vacuum cleaner with a soft nozzle. Before that, you need to lay out a fur coat on a horizontal surface with a white sheet.
4. When the procedure is completed, the lining should be sewn back.

The secret of oat bran

Even with the help of oat bran, you can clean a rabbit fur coat at home with high quality. For this you need:

1. Wash the non-stick pan and dry it.
2. Pour about 100 grams of oat or flax bran into it.
3. Heat the composition on the stove, but do not fry.
4. Lay out the fur coat on a clean table, pour heated bran on it and rub it thoroughly. If the composition is not enough, make more.
5. At the end of the procedure, the fur must be combed with a special brush in the direction of the villi, and then hung on a coat hanger.
6. When the fur coat dries a little, it should be combed again, trying not to harm the fur.

Important! Many housewives use a broom as a brush. Do not take this into account, as there is a risk of staining the garment even more.

Using table vinegar

Such a composition is used not only to wash a rabbit hat at home, but also to make the fur product silky and soft. To use this method, you must follow the following algorithm:

• Dilute 9% vinegar with clean water in a ratio of 1:2.
• Dip a cotton pad into the solution and walk it over the contaminated area several times.

Important! Do not press too hard on the fur, do the procedure with the utmost care.

• When the manipulations are completed, you need to wipe the product with a soft damp cloth, dry it naturally.
• Comb a fur coat or hat with a special brush.

Important! Since rabbit fur is very capricious, only mild table vinegar should be used. If an essence is used, it must be diluted with cold water based on 100 ml of vinegar 1 liter of filtered water.

We use baby powder

This method is referred to as dry, since before the procedure it is not necessary to treat the product with water. To wash a rabbit hat at home in this way, you need:

1. Cover with powder the entire surface of the product.
2. It is good to rub it into the pile so that all greasy stains are absorbed into the product.
3. Leave the product in this position for about 15 minutes.
4. When the time is up, shake the product and vacuum it.
5. Comb the product with a soft brush with frequent teeth. Her role can be performed by a brush for animal hair.
6. Remove any remaining talcum powder with a hair dryer or fan.

Important! Talc can be replaced with wheat flour, and the principle of action will not differ.

Gasoline use

Required materials:

• Clean gasoline (the one that fills lighters is suitable).
• Corn starch.
• Brush designed for fur products.

Important! Before proceeding with the processing of a fur coat, it is necessary to open all the windows and make sure that there is no open fire nearby. It should also be noted that children and animals should not be in the room.

So, here is the basic procedure that will help you wash a rabbit hat at home:

1. Shake coat several times. The ideal option will be if the product has already been embossed on the street in the “grandmother's” way.
2. Mix 100 g of starch with gasoline so that the result is a mixture similar to sour cream.
3. Rub the resulting composition against the direction of the villi.
4. Shake the product and repeat such manipulations several more times.
5. When all the steps are completed, the fur coat needs to be combed, removing the remnants of the mixture.

Important! You may be bothered by the smell of gasoline after the procedure. Don't worry, it will fade in 3-4 days.

06.12.2016 0 3 374 views

How to clean a rabbit fur coat at home?

Rabbit fur is the most common material for creating hats and fur coats. Such products are especially popular, but not everyone knows how to clean a rabbit fur coat at home.

The easiest way to clean is to go to a dry cleaner, but knowing certain nuances, you can easily take care of the product at home.

It is important to treat rabbit fur with special delicacy, because its pile is very soft and fragile, and it can be easily damaged. Below you will learn how to properly clean rabbit fur.

Rabbit Fur Cleaners

Having touched the product, you can see how delicate its hairs are. This means that aggressive cleaning will not work for him. Before proceeding with the care itself, a fur coat or hat needs to be prepared, and only after that begin to use various compositions.

You can use a variety of products to clean your home.

Starch

Starch is a sorbent of natural origin. It well absorbs various particles of dirt and dust. Starch has a mineral nature, therefore it is absolutely safe for natural pile.

To clean the fur product, you must:

1. Lay the coat on a flat surface, lining down.
2. Sprinkle generously with starch on top and leave for a few minutes so that it takes away all the impurities.
3. Gently shake off all sorbent particles from the fur coat.
4. For a more thorough removal, the product must be combed with a soft brush without sudden movements, and always in the direction of the pile.

During the procedure, the starch changes its color and becomes dark and dirty. Therefore, it is necessary to repeat the cleaning until the loose mixture becomes completely white.

Vinegar

Effectively fights dirt 9% vinegar, it is suitable for cleaning both white and dark fur. To do this, it is diluted with water in a ratio of 50 to 50. A cotton pad is moistened in the solution and they are passed through the pile of the product. Thus, all dirt particles remain on the disc.

To remove more serious contaminants, you can use vinegar essence, but you need to be extremely careful with it, because it has a more aggressive effect. It is not recommended to wet the pile with the solution too much.

Bran

Another sorbent of natural origin is bran. To clean rabbit fur:

1. Pour the dry mixture of bran into a pan and heat over low heat.
2. Place the fur product on a flat surface.
3. Sprinkle warm bran on top and rub it in with your hand.
4. After a few minutes, the product must be combed with a soft brush in the direction of the pile.

To make sure that there are no particles of bran left on the product, it can be gently shaken off.

Peroxide

White rabbit fur looks very beautiful and elegant, but has one unpleasant property - it turns yellow under the influence of the external environment. To restore the product to its former clean and tidy appearance, use hydrogen peroxide.

1. Add a few drops of ammonia and 1 tablespoon of peroxide to a mug of clean water.
2. The solution is poured into a spray bottle and sprayed onto the surface of the fur coat.

It is not necessary to wash off the solution, it is enough to place the product in a well-ventilated area away from artificial heat sources.

Talc

Talc has the same functions as starch and bran. It literally absorbs all the impurities that are between the villi.

• the fur product is abundantly sprinkled with talc and rubbed with his hand;
• after a few minutes, the powder must be removed from the surface of the fur coat, for this it is shaken off or combed out with a comb with soft bristles.

This cleaning method is suitable for both white and dark fur.

How to refresh a fur coat?

In order not to get an unsightly fur coat out of the closet before the start of the cold season, it needs to be looked after and preferably regularly.

Washing in washing machine it is not suitable for such delicate fur, as this will lead both to deformation of the skin and to the loss of the pile or its falling off. Therefore, during the entire warm season or before the start of the winter, it is recommended to do the following:

• the fur coat must be wrapped in a clean cloth or sheet;
• gently knock it out do not use excessive physical force;
• prepare a weak vinegar solution and use a cotton pad to wipe the pile of the product with it;
• dry the fur coat away from the battery or heater;
• to add shine to a fur coat, wipe the pile with pharmacy glycerin.

Stain removal

Even outerwear can suffer from greasy stains that spoil it significantly. appearance. To remove all greasy contaminants, you must use:

• refined gasoline or technical alcohol;
• water;
• cotton swab.

Gasoline is mixed with water in a ratio of 1: 1, a cotton pad is moistened in the resulting solution and the pile of the product is wiped with it. After processing, the fur coat must be well ventilated to rid it of a chemical smell.

The procedure is best done outdoors. It is important to remember: gasoline can only be used diluted in water.

To remove greasy dirt from the collar and cuffs, you can prepare the following mixture:

1. Mix half a liter of water with 3 tbsp. spoons of salt and 1 tbsp. a spoonful of ammonia.
2. The mixture is applied to the places of contamination and left for 30 minutes.
3. After the allotted time, the fur coat must be wiped with a damp cloth, and then dry.

White spirit, which is mixed in equal proportions with ammonia, will help to eliminate greasy stains from fur clothes. After applying the cleaning composition, you need to wait a few minutes, after which it should be removed with a clean, damp cloth.

Lining cleaning

Not only the pile of the product needs cleaning, but also its lining. During wear, it is also prone to pollution and the appearance of greasy greasy stains. In order to tidy up the appearance of the lining fabric, you must:

1. Mix purified gasoline in equal proportions with technical alcohol.
2. Moisten a cotton swab and go over the contaminated areas.
3. Wait until the product is completely dry.

When cleaning with such strong products, it is important to ensure that the lining does not come into contact with the skin.

Delicate soft rabbit fur is an excellent choice for tailoring outerwear. It is lightweight and retains heat very well. In combination with a democratic price, a fur coat becomes a desired wardrobe item for many fashionistas, and caring parents buy it for their children. The ease of coloring and the range of styles add pluses to such clothes.

At the same time, the frequency of wearing a favorite thing implies its regular cleaning from dust and dirt from city streets. How to clean a rabbit fur coat at home and not take it to a professional dry cleaning company, this article will give detailed answers.

Warm and beautiful outfit for a charming woman

Dry cleaning methods

Any natural fur Doesn't do well when wet. During the procedures, it is necessary to control the process so that moisture does not get on the leather base of the fur coat. Wet mezdra becomes very hard after drying, and is also able to decrease in size.

Cleaning is carried out on a flat plane or by hanging outerwear on a coat hanger. The method depends on the selected cleaning method. Before the procedures, the product is carefully shaken out from dust pollution and possible debris.

Rabbit fur is extremely soft and delicate due to the fineness and length of the hairs. Rough cleaning with hard brushes is not suitable for her. Dry options are considered ideal for cleaning fur.

Among the folk substances that have the properties to effectively absorb moisture and dirt in the fur fabric are starch, semolina and talcum powder. These powders also cope with fatty contaminants, make the product shiny and fluffy.

The algorithm for cleaning is simple:

• One of the proposed means is sprinkled on the surface of the thing from all sides and rubbed into the pile with smooth movements of the fingers.
• Leave the item to act for 1 hour.
• Starch or talc is carefully shaken out of the fur by hand, using soft clothes brushes and combs with sparse teeth. You can remove the powder with a vacuum cleaner. But the intensity of air suction should be minimal so as not to damage the pile.

Important! Do not allow the presence of residues of substances between the hairs of the fur. Otherwise, they will become an excellent bait for moths, and under the influence of moisture they will become a breeding ground for bacteria and microbes.

Also effective in the fight for the purity of the rabbit cover are ordinary wheat or rye bran. They should be well warmed up, but not burning and comfortable for hands. For heating, a metal pan is suitable, which is ideally washed from foreign substances and odors.

Warm and elegant coat for winter

Hot bran is scattered over the fur. Next, gently rub the bran with your fingers to enhance the effectiveness of the ingredient. To remove product residue, the product is shaken and combed out. Work should be done with a brush with soft bristles or with a rare arrangement of blunt teeth on it. The direction of movement along the growth of the pile, from the roots to the tips of the hairs.

Wet cleaning methods

Wet cleaning methods using chemicals are very popular among the people. It is absolutely impossible to wash a fur coat made of rabbit fur. The fur is prone to matting, and the warp may break through or shrink. Therefore, at home, she is shown a maximum of wet surface treatment.

The easiest way is to cover the fur coat with a moistened sheet and knock out the dust. After that, the pile is wiped with vinegar and dried thoroughly.

In addition, you can always apply soap suds or a solution:

• The shampoo lathers in warm water.
• The foam rubber sponge is moistened, slightly wrung out, then the fur is wiped.
• Instead of shampoo, you can use dishwashing liquids, however, only colorless ones that do not contain dyes.
• Then the fur coat is dried on the shoulders.

After any wet procedures, furs require additional nutrition in order to restore their softness and shine. In this case, glycerin will become indispensable.

Important! It happens that during wet processing, lumps of fur are formed. To straighten them, you need to moisten them with alcohol and gently untangle them with your fingers. After unraveling, you can use a comb and scrupulously comb the fur coat.

Cleansers for white rabbit fur

Models of fur coats from light shades of a rabbit acquire an unattractive yellowness over time. Such a nuisance happens after repeated wetting in snowy weather and poor drying after that. How to clean a white rabbit fur coat from dirt and yellowness? There are several options for this:

White fur coat requires careful processing

• First of all, a dry method of cleaning with semolina, talc or bran is suitable for white fur. After cleaning, the fur coat is moistened with a spray bottle and carefully combed with a wooden comb for a straightened look at the pile. Next is drying.
• Hydrogen peroxide can also correct the situation with yellowness. A tablespoon of this product is poured into 200 ml of water, and then a few drops of ammonia are added. You should not get carried away with ammonia, as it can not only clean the fur, but also dry it out. The resulting solution is poured into a spray bottle and sprayed over the surface of the fur coat.
• Do not neglect the cleansing properties of vinegar. Diluted in half with water, it is applied with stroking movements to the pile with a cotton swab. If the fur coat is heavily soiled, then the concentration of vinegar can be increased. If such home measures are not effective, you will need to contact dry cleaning specialists.

There is also a method of getting rid of the yellow tint, based on an optical illusion. It is implemented using a weak blue solution. A couple of drops of blue is added to a small amount of water to get a light blue tint. foam sponge moistened in this solution, the fur part of the fur coat is processed with movements along the growth of the hair. Next - drying the fur coat on the shoulders.

Features of drying and storage

After wet procedures for cleaning the fur or after a snowfall, when the pile is moistened, it must be thoroughly dried. However, electrical appliances and heating devices cannot be used. Their action negatively affects the color of outerwear. This will be best seen on light models. Fur needs to be dried naturally at room temperature. The fur coat is hung on the shoulders, the crumpled fur is neatly combed out.

A completely cleaned and dried fur coat is stored in the closet in the off-season, after placing it in a linen case along with a moth remedy. Occasionally, you should ventilate the fur thing.

When trying to clean a rabbit coat, one should not forget about its service life. It is approximately 4 years old. After which even the most effective methods may not bring the desired result.